1.
CHANGE OF THE MICROSTRUCTURE AND ITS EFFECT ON THE SOFTENING-MELTING PROPERTY DURING THE SOFTENING-MELTING PROCESS OF SWEDISH PELLETS
瑞典球团矿在软熔过程中的显微结构变化及其对软熔性能的影响
2.
Influence of Flux Injection Through Tuyeres on Burden Softening-Melting Properties and Primary Slag Properties
从风口喷吹熔剂对炉料软熔性能和初渣性能的影响
3.
Design of Intelligent Temperature Control System for Performance Test of Softening Melting Process
软熔性能测试过程智能温度控制系统的设计
4.
Study on Microstructure and Performance of Ni-SiC Cladding by Argon Arc Cladding
氩弧熔覆Ni-SiC熔覆层组织与性能研究
5.
having the property of softening or fusing when heated and of hardening and becoming rigid again when cooled.
有软化或熔化的特性，当加热时变软、冷却时变硬。
6.
Research on Properties of Al_2O_3-CaO Slag
Al_2O_3-CaO熔渣性能的研究
7.
Research of Technology and Properties of Laser Cladding on Ni/Wc-La_2O_3 Surface of T10 Steel
T10表面激光熔覆Ni/WC-La_2O_3工艺与熔覆层性能研究
8.
Study on the Characteristics of Molten Pool Based on Inside-Ring Laser Coaxial Powder Feeding and Properties of Cladding Layers
环形激光光内送粉熔池特征与熔层性能
9.
Experimental Study on Melting Properties for CaO-Al_2O_3-MgO Slag System with Low-melting-point Zone
CaO-Al_2O_3-MgO渣系低熔点区熔化性能的实验研究
10.
Properties of Laser Cladding on Ni 60-La_2O_3 Surface of T10 Steel
T10钢表面激光熔覆Ni60-La_2O_3熔覆层性能研究
11.
Effect of Laser Cladding Processing Parameters on Microstructure and Properties of Cladding Layer
激光熔覆工艺参数对熔覆层组织和性能的影响
12.
Hydrogen Storage Properties of La_2Mg_(17) Alloy Prepared by a Smelting Method with Protection by Molten Salt
熔盐保护熔炼法制备La_2Mg_(17)合金及其储氢性能
13.
A STUDY OF RHEOLOGICAL PROPERTIES OF MOLTEN POLYETHYLENE TEREPHTHALATE--Part Ⅱ:Rheological Properties of PET Melt at High Shear Rate
聚酯熔体流变性能的研究——高剪切速率下熔体的流变性能
14.
When the ambient air temperature is around25±5℃, the characteristics of the fuse carrying capacity and convention fusing, refer to Fig.2.
当周围空气温度为25±℃时，熔断器的载流能力及约定熔断性能见表2。
15.
Research on Microstructure and Performance of High Hardness Ni-based Self-Fluxing Alloy after Flame Remelting
火焰重熔高硬度镍基自熔性合金组织及性能研究
16.
Performance of External Fuse Protection and Connection Mode of Capacitor Group
外熔丝保护性能与电容器组接线方式
17.
Adjusting of properties of low molecular polyamide hot melt adhesive
低分子聚酰胺热熔粘合剂的性能调节
18.
Preparation and Performance Study of Surface Melting Layer on Mg Alloy;
镁合金表面熔敷层的制备与性能研究