1.
Modeling and Experiment Investigation of the Flow Field during the Free Abrasive Machining;
游离磨粒加工中流场的数值模拟与实验研究
2.
The distinct element simulation of semifixed abrasive processing parameters influencing 'trap' effect
半固着磨粒加工工艺参数对“陷阱”效应影响的离散元模拟
3.
Research on the Material Removal Mechanism of Semi-Fixed Abrasive Tool
基于半固着磨粒磨具加工的材料去除机理研究
4.
WATER-JETS AND ABRASIVE WATERJETS PRINCIPLE AND THEIR INDUSTRY APPLICATIONS
水力喷射和水力磨粒喷射加工原理及工业应用
5.
Magneto-Rheological Fluid Free Abrasive Precise Machining and Simulation
基于磁流变液的自由磨粒精密加工技术及仿真
6.
The investigation of surface quality and grinding forces of grinding processing of particle reinforced matrix aluminium composites
颗粒增强铝基复合材料磨削加工表面质量与磨削力研究
7.
Wheel wear and ground quality when grinding SiC reinforced aluminum matrix composite with electroplated diamond wheel
SiC颗粒增强铝基复合材料磨削中砂轮磨损与加工质量研究
8.
The Technologic Research of Mould Structural Surface Polishing Processing Based on Flexible Liquid-solid Two Phase Abrasive Flow
基于“软性”液—固两相磨粒流的模具结构化表面光整加工的工艺研究
9.
Study on the Mechanism and Surface Characteristic for Abrasive Jet Precision Finishing with Grinding Wheel as Restraint;
砂轮约束磨粒喷射精密光整加工机理及表面特性的研究
10.
The Development and Experimental Analysis and Research on Finishing Performance of Magnetic Abrasive Grains;
磁性磨粒的研制及其加工性能的实验分析与研究
11.
3D Profile and Generating Mechanism of Cylindrical Surface Lapping Machined with Abrasive Jet Flow Restricted by Grinding Wheel
砂轮约束磨粒喷射加工外圆表面创成机理及三维形貌
12.
The Fractal Dimension and Tribological Characteristic Investigation of Finishing Surfaces for Abrasive Jet Finishing Restricted by Grinding Wheel
砂轮约束磨粒喷射加工表面的分形及摩擦特性研究
13.
Residual Stress and Tribological Characteristics of Ground Surface After Abrasive Jet Restricted by Grinding Wheel
砂轮约束磨粒喷射加工表面残余应力及摩擦特性
14.
The Fractal Dimension of Cylindrical Surfaces for Abrasive Jet Finishing Restricted by Grinding Wheel
砂轮约束磨粒喷射精密光整加工外圆表面分形维数的研究
15.
Analyses of the Chips of High-Cr Iron Worn off under Abrasive Wear Conditions
高铬铸铁在磨粒磨损工况的磨屑形貌分析
16.
Sub-micron grades with extremely high wear resistance for abrasive materials such as laminated chip board, hard wood, etc.
是适合于研磨料（比如电木板、硬木）的加工，具有极高的耐磨性，晶粒度为亚微米级的牌号。
17.
The Acceleration Mechanism and Movement Pattern of the Particle in the Abrasive Water Jet
磨料射流中磨料粒子的加速机理和运动规律
18.
The Research of Friction Wear of Internal Combustion Engine Bases on The Method of Heating Analysis of Ferrograms;
分析内燃机的磨损磨粒—利用铁谱加热法