1.
bead diameter at rim seat of cycle tyre
力车轮胎胎圈着合直径
2.
bead seat optional contours
可选择的胎圈座轮廓
3.
Development of HTΦ0.96mm tempered bead wire
HTΦ0.96mm回火胎圈钢丝的开发
4.
hard rubber bead
硬橡皮撑轮圈，硬 质胶胎圈
5.
Bead fit test method for tube aircraft tyre
GB/T11195-1998航空有内胎轮胎胎圈密合压力试验方法
6.
Optimized analysis on chafer width of TBR tire
全钢载重子午线轮胎胎圈包布宽度优化分析
7.
Reason Analysis of Laying Fracture of Wire Rod C82DA for Steel Curtain
胎圈钢丝用盘条C82DA吐断问题原因分析
8.
Development of diameter 1.55mm HT tempered bead wire
Φ1.55mm HT回火胎圈钢丝的研制
9.
Mainly used during the formation lap to allow the driver to spin the rear wheels and generate heat in the tyres.
主要被用在暖胎圈，让车手可以打滑后轮，进而提高轮胎的温度。
10.
FEA Simulation for Crack Growth Near Bead Coil of Heavy Duty Radial Tires and the Life Estimate;
载重子午胎胎圈处裂纹扩展的有限元模拟及寿命预估
11.
Research on the Drawing Technology of Tyre Bead Wires and Aperture Design of the Drawing Die
胎圈钢丝拉拔工艺和模具孔型设计研究
12.
Influence of finished product procedure process on tempered bead wire adhesion force
成品工序工艺对回火胎圈钢丝黏合力的影响
13.
Influence of the range of elastic modulus on the determined elongation at rupture and yield strength ratio of bead wire
弹性模量设定对胎圈钢丝破断伸长率和屈强比测试结果的影响
14.
cycle tyre bead ring flipper
力车轮胎钢丝圈包布
15.
Bead unseating resistance test for tubeless passenger car tyres
GB/T4504-1998轿车无内胎轮胎脱圈阻力试验方法
16.
European Tyre and Rim Technical Organization
欧洲轮胎和轮圈技术组织
17.
Unseat by water pressure testing method for cycle tyres
GB/T9763-1997力车轮胎脱圈水压试验方法
18.
Something whose form is reminiscent of a ring-shaped cake.
汽车轮胎形如甜甜圈的环状物