1.
Deformation of sandwich beams with spherical pore Al alloy foam core in three-point bending
球形孔泡沫铝合金三明治梁的三点弯曲变形
2.
Study on a New Type of Spherical Pore Al Alloy Foam with Low Porosity and High Strength;
新型球形孔低孔隙率泡沫铝合金制备及相关性能研究
3.
Metallurgy Bonding of Closed-cell Aluminum Foam with Aluminum and Aluminum Alloy Plate
闭孔泡沫铝与铝及铝合金覆板的冶金结合
4.
THE MECHANICAL BEHAVIORS OF CLOSED-CELL ALUMINUM-ALLOY FOAMS WITH SPHERICAL PORES
球形闭孔泡沫金属材料力学行为研究
5.
Effect of Preheating on Cell-structure of Al Alloy Foam Prepared by Two-step Foaming Method
预热对二次泡沫化法制备泡沫铝合金孔结构的影响
6.
Study on Spherical Pore Al Alloy Foam with Fractal Theory and Fem Method;
球形孔泡沫铝孔结构的分形特性和有关性能的有限元法研究
7.
Metallurgy bonding on the fabrication of shaped Al alloy foam
泡沫铝合金异型件形成过程中的冶金结合
8.
Al-Si foam was fabricated by direct melt foaming.
采用熔体发泡法制备泡沫铝硅合金。
9.
Influence of Alloying, Pore Structure and Filler on the Compressive Behavior of the Open-Cell Aluminum Foams;
合金化与孔结构及填充物对泡沫铝压缩行为的影响
10.
The Wettability Behaviors Research between Al-Ge Alloy and Vesicant of Aluminum Foams
铝锗合金对泡沫铝发泡剂的润湿性研究
11.
EFFECT OF ALLOYING ON COMPRESSIVE MECHANICAL PROPERTIES OF THE ALUMINUM ALLOY FOAMS;
合金化对泡沫铝压缩力学性能的影响
12.
Indentation Property of Closed-cell Aluminum Foam under the Flat-end Cylindrical Indenter
闭孔泡沫铝在圆柱形平压头下的压痕性能
13.
Experimental study on cellular structure statistical analysis and uniaxial deformation behavior of closed-cell aluminum foam
闭孔泡沫铝特征统计及其变形行为实验研究
14.
Foaming Behavior and Compression Property of Al-alloy Foams
泡沫铝合金发泡特性及压缩性能的研究
15.
Preparation and Analysis on the Defects of Aluminum foams via Melt-foaming method
熔体发泡法制备泡沫铝合金及其缺陷分析
16.
Factors Influencing Preparing Micro-pore Composite Foam Aluminum by Vacuum Infiltration Method
真空渗流法制备微孔复合泡沫铝的工艺研究
17.
Research on Process and Properties of Open Cell Aluminum Foams by the Space-holder Method;
粉末冶金—添加造孔剂法制备开孔泡沫铝及其性能研究
18.
Studies on the Dynamic Mechanical Properties and Energy Absorption of Aluminum Alloy Foams
泡沫铝合金动态力学性能及其吸能机理的研究