1.
Cracking Analysis of CrWMn Steel Piercing Mould
CrWMn钢冲孔模具加工过程中开裂分析
2.
Mechanism of Small Hole Punching on Thick Blank and Study on Die Life-span;
厚钢板小孔冲裁机理及模具失效研究
3.
Analysis of Metal Flow and Die Stress for Eyelet Machine of Seamless Steel Pipe;
无缝钢管管坯冲孔机金属变形及模具受力分析
4.
Design of blanking and punching compound mould about the high speed marine carburetor
高速船用化油器落料冲孔复合模具设计
5.
Design of Side Hold Punching Die for the Fixed Frame in Automobile Steering System
汽车转向系统中固定架冲侧孔模具设计
6.
Stamp High-Density Eyelets on Stainless Thin Steel Plate and Optimize Mold Design;
不锈钢薄板高密度小孔冲压加工及模具优化设计
7.
Plastic injection mould, coolant passages, eject pin and electrical heating holes.
塑胶射出模具–却水孔、梢孔及电热孔.
8.
sidepiercing cam actuated die
侧楔作用侧向冲孔模
9.
The measure of improving life of die without die plate for the hole punching on steel pipe
钢管无凹模冲孔冲头寿命提高的措施
10.
The Analysis and Defense Measure of Thin Punch Destruction
冲小孔凸模破坏形式分析及预防措施
11.
The application of EDM in machining technology for more holes die
电加工在多孔冲模加工工艺中的应用
12.
Design of an Automatic Dividing Punch Mould for Spokes on Wheel Cranes
轮式起重机轮辐自动分度冲孔模设计
13.
Apply ANSYS in Optimizing Eyelet Clearance of Punching Die;
ANSYS在小孔冲模间隙优化中的应用
14.
Improvement of spline rod and set of piercing die forbasket type cage
筐形保持架冲孔模花键杆、套的改进
15.
Design of piercing-blanking progressive die based on Pro/E-PDX
基于Pro/E-PDX的冲孔、落料连续模设计
16.
Numerical simulation of the process of pore collapse under shock load
冲击载荷下孔隙塌缩过程的数值模拟
17.
Numerical Simulation of the Wear of the Fine Blanking Die and Estimation of the Die Life
精冲模具磨损的数值模拟及模具寿命估算
18.
Discussion of the Influence of the Die Oearance on the Lamination Quality and Die Life
浅谈冲模间隙对冲片质量及模具寿命的影响