1.
Research on Equal Channel Angular Rolling and Drawability of AZ31 Magnesium Alloy Sheet;
AZ31镁合金板材等径角轧制及冲压性能研究
2.
Research on Equal Channel Angular Rolling and Annealing Techniques of AZ31 Magnesium Alloy Sheets;
AZ31镁合金板材等径角轧制和退火工艺研究
3.
Research on Equal Channel Angular Rolling and Plastic Deformation Machnism of AZ31 Magnesium Alloy Sheets;
AZ31镁合金板材等径角轧制工艺及塑性变形机理研究
4.
Microstructures and Mechanical Properties of AM60 Magnesium Alloy Sheet Processed by Equal Channel Angular Rolling;
等径角轧制AM60镁合金板材的显微组织与力学性能
5.
PASS DESIGN AND ROLLING OF NO.10/6.3 UNEQUAL-LEG ANGLE STEEL
10/6.3号不等边角钢的孔型设计与轧制
6.
Sirle-roll Drive and unegual Diameter Rolling for Cold Strip Mill
冷轧带钢轧机的单辊传动和异径轧制
7.
Softening resistance of CuCrZr alloy fabricated by equal channel angular pressing
等径角挤压制备CuCrZr合金的抗软化性能
8.
butterfly angles pass
轧制角钢用蝶式孔型
9.
THE DEVELOPMENT OF ∠12.5 ANGLE STEEL ON THE φ530/φ400 ROLLING MILLS
φ530/φ400轧机实现∠12.5角钢的轧制
10.
Optimum Design Roll Passes of Rolling No.20 Angle Iron Through Medium Section Mill;
中型轧机轧制20号角钢孔型优化设计
11.
Twin-roller eccentricity and different diameter caster with caster mouth of adjustable obliquity
铸嘴倾角可调的偏心异径双辊铸轧机
12.
Study on the influence law of the rolling curve affected by rolling radius during cam shaft cross wedge rolling
楔横轧凸轮轴轧制半径对辊形曲线影响的规律
13.
Investigatinng of the Structure of Bulk Ultrafine-Grained Material Prepared by Equal Channel Angular Pressing (ECAP);
等径角挤压法制备块体超细晶材料的工艺研究
14.
Study on preparation of ultra-fine grained CNTs/AZ31 alloy composites by equal channel angular pressing
等径角挤压制备超细晶CNTs/AZ31镁基复合材料研究
15.
Hot rolled stainless steel with equal leg angles
GB/T4227-1984不锈钢热轧等边角钢
16.
On the Model of Prediction Temperature and Rolling Force Model in Splitting Caliber for Continuous Rolling Steel Angles
角钢连轧温度预报与切分孔轧制力模型
17.
PRODUCTION PRACTICE OF ENHANCING EQUILIBRIUM RATIO OF THE MINUS-DEVIATION ROLLING IN THE HOT ROLLED ANGLE
提高热轧角钢负偏差轧制均衡率的生产实践
18.
the unit of plane angle adopted under the System International d'Unites; equal to the angle at the center of a circle subtended by an arc equal in length to the radius (approximately 57.295 degrees).
国际单位制采用的平面角单位;长度等于半径的弧所对的圆心角。