1.
CONTAINING TI AND B HARD--FACING EELECLRDE RESEARCH ANALYSIS FOR THE HARDNESS WEAR-RESISTING ANTI-ARAC PROPERTY
含钛硼堆焊焊条研究——堆焊金属的抗裂、硬度、耐磨性分析
2.
Research on Microstructure and Micro-hardness of Deposited Metals with Steel 45 as Substrate Material
45钢堆焊金属组织及显微硬度研究
3.
Research on microstructure and micro-hardness of overlaying deposited metal of D227 and D237 electrode
D227、D237焊条堆焊金属组织及显微硬度研究
4.
Filler rods for gas welding of mild steels and low alloy high tensile steels - Determination of mechanical properties of deposited weld metal
软钢、低合金高强度钢气焊用焊条－－堆焊金属的力学性能的测定
5.
Two Novel Wear-resistant Surface Welding Materials and the Structure Property of Deposited Metal;
两种新型耐磨堆焊材料及其堆焊金属组织性能研究
6.
Microstructure and Properties of In-Situ Synthesized Nb-Cr-Ti/C Surfacing Welded Metal
原位复合(Nb-Cr-Ti)C堆焊金属的组织与性能
7.
Influence of magnetic field controlling on microstructure and properties of plasma arc surfacing layer
磁场控制对堆焊金属组织及性能的影响
8.
Research on Principles of Influence of Intermittent Alternative Magnetic Field on Microstructure and Properties of Plasma Arc Surfacing Layer
间歇交变磁场对等离子堆焊金属组织及性能影响机理的研究
9.
Influence of transverse alternative magnetic field frequency on microstructure and properties of plasma arc surfacing layer
横向交流磁场频率对堆焊金属组织及性能的影响
10.
Influence of intermittent alternative magnetic field waveform on microstructure and properties of plasma arc surfacing layer
间歇交变磁场波形对堆焊金属组织及性能的影响
11.
Investigation on Properties of Deposited Metals by Shielded Metal Arc Welding Process D172;
D172焊条电弧堆焊熔敷金属性能研究
12.
Study on Fe_3Al Cladding Materials;
Fe_3Al基金属间化合物堆焊材料的研究
13.
Development of Metal Powder-cored Wire for Submerged Overlaying on Hot Roll;
热轧辊埋弧堆焊用金属粉型药芯焊丝的研制
14.
DEVELOFMENT OF MARAGING STEEL METAL POWDER-CORED WIRE FOR TIG SURFACING DIE;
TIG模具堆焊马氏体时效钢金属粉芯焊丝的研制
15.
Study on Microstructure and Property of Deposited Metal Prepared by Electrode CHR132 and CHR172;
焊条CHR132和CHR172堆焊熔敷金属组织及性能研究
16.
The Development of Metal Cored Self-shielded Flux-cored Wire for Submerged Overlaying
金属粉芯自保护堆焊用药芯焊丝的研制
17.
Research for the Mechanism of Microalloyed Carbonitride for the Martensitic Stainless Steel Hard-facing Flux-cored Wire Deposited Metal;
马氏体不锈钢硬面药芯焊丝堆焊层金属碳氮微合金化研究
18.
Microstructure and wear resistance of metal-based ceramics composite coating deposited by plasma arc surfacing
金属基陶瓷复合等离子弧堆焊层组织与耐磨性能