1.
continuous sheet-bar and billet mill
连续式薄板坯和钢坯轧机
2.
Effect of roll gap shrinkage optimization on slab quality
板坯辊缝收缩优化对铸坯质量的影响
3.
Analysis on Causes of Slab Stagnating in CC and Their Improvement Measures
板坯连铸“滞坯”原因分析及改进措施
4.
Bars and plate blanks of molybdenum
GB/T3462-1982钼条和钼板坯
5.
overhead revolving slab charging machine
架空式板坯回转-装料机
6.
2-Hi universal type slabbing mill
二辊式万能板坯初轧机
7.
vertical roll entablature
(板坯初轧机的)立辊横梁
8.
Study of Solidification Heat Transfer Mathematical Model for Dynamic Withdrawal Process in Slab Continuous Casting;
板坯连铸动态拉坯过程凝固传热数学模型研究
9.
Study on Solidified Shell Thickness Measurement and the Solidified Shell Shape of Slab
连铸板坯坯壳厚度测定及凝固壳形貌模拟研究
10.
Optimization of secondary cooling scheme of combined caster
方/板坯连铸机浇铸矩形坯二冷制度优化
11.
Comparison and Choice of the Temperature Maintaining Equipment in the Thin Slab Continuous Casting and Rolling
薄板坯连铸连轧生产线中间坯保温设备的比较
12.
Experimental Study on Transient Friction Behavior Between Mould and Strand in Slab Continuous Casting
板坯连铸结晶器/铸坯瞬态摩擦行为的实验研究
13.
slabbing action
板坯的垂直压下或侧压下
14.
Slab: rectangular in cross-section, with rounded corners and more than 5cm in thickness.
大板坯--横断面为矩形，圆角，厚度在5cm上。
15.
Formation and Control of Oscillation Mark for 304 Stainless Steel Continuous Casting Slab
304不锈钢连铸板坯振痕形成及控制
16.
Design and performance of thick slab CCM
鞍钢厚板坯连铸机的设计及使用效果
17.
Detection and Control of Instrument for AISC No.2 Slab Continue Caster
鞍钢2号板坯连铸机仪表检测与控制
18.
Liquid Steel Solidifing State Analysis in Mould the C C.slab
板坯连铸结晶器内钢液凝固状态分析