1.
Research on External Flow Field of Pressure Swirling Nozzles under Different Wind Speeds
轴流风速下压力旋流喷嘴外流场特性研究
2.
Numerical and experimental investigation of flow in swirling nozzle
旋流喷嘴内部流场的数值模拟和实验研究
3.
The results show that the initial parameters and thepressure difference between outer and inner surface of the hollow jet play adominant role on the shape of the liquid jet.
结果表明，旋流喷嘴的初始参数和空心射流内外表面压力差是决定射流形状的主要因素。
4.
Experimental study on the swirling characteristics of a swirling water jet nozzle by using PIV
旋转射流喷嘴内旋流特性的PIV实验分析
5.
Numerical Simulation on Flow Field of Rotory Jet Mixing System and Nozzle Structure Optimization;
旋转射流搅拌全流场数值模拟及喷嘴结构优化
6.
Numerical Study on Liquid-solid Two-phase Flow in Low-pressure Swirl Atomizing Nozzle
低压旋流雾化喷嘴内液固两相流动的数值研究
7.
Numerical Analysis on Cross Flows Velocity Affected to Swirl Jet Atomization
横向流速度对旋流式喷嘴雾化影响的数值分析
8.
Study on Nozzle Wear Mechanism and Drilling Test of Swirling Abrasive Water Jet;
旋转磨料射流喷嘴磨损机理与钻孔试验研究
9.
Experimental Research on Parameters of Nozzle Slotted in Non-submerged High Pressure Swirling Jet
非淹没高压旋转水射流喷嘴割缝参数试验研究
10.
Influence of Entrance Shrinking Angle on Nozzle Wear in Swirling Abrasive Water Jet
入口收缩角对旋转磨料射流喷嘴磨损的影响
11.
Study on Three-dimensional Swirling Airflow and Motion of Flexible Fiber in Air-jet Spinning Nozzle
喷气纺纱喷嘴内三维旋转气流场及柔性纤维运动的研究
12.
Numerical simulation studies of influences on the flow-fieldproperties of the rotary jet by nozzle geometric parameters
喷嘴几何参数对旋转射流流场性能影响的模拟分析
13.
An outlet, such as a nozzle, used for emitting such a stream.
喷嘴用于施放流体的出口，如喷嘴
14.
hose-pipe nozzle fitted with tap, cocks, valves or other devices for regulating liquid flow
软管喷嘴,装有螺塞、旋塞、阀门或其他调节液体流量的装置
15.
Experiment investigation on atomization characteristic of an air-blast atomizer with centrifugal nozzle and co-dual-swirl cup
离心式同向双旋流器空气雾化喷嘴雾化特性研究
16.
sonic nozzle flow prover
声速喷嘴流量检定装置
17.
ASME Flow Nozzles and GB/T 2624-93 Flow Nozzles Calibration for Turbine Testing
汽轮机性能试验ASME流量喷嘴及GB/T2624-93喷嘴校验
18.
Research about Nozzle Discharge Speed Distribution for Meltblown Model
熔喷模头喷嘴孔流场速度分布的研究