1.
Processing Technical Study for Steam DrumTemperature-Measuring Seat Small Bore Deep Blind-Hole
汽包测温座小口径深盲孔的加工工艺研究
2.
Design and Application of Assistive Tool with One-ton Air Hammer Process Deep Blind Hole Shaft Forgings
10kN空气锤高效生产深盲孔长轴类锻件的辅助工装设计及应用
3.
An experimental study of drilling small and deep blind holes with an abrasive water jet
磨料水射流钻削深小盲孔的试验研究
4.
Form and position measurement of blind hole of deep cavity based on endoscopic optical path
基于内窥光路的深腔盲孔形位检测及应用
5.
Elimination of Burning-on in Blind and Tenuous Hole in Negative Pressure Lost Foam Casting
消失模铸造中盲孔及细深孔粘砂问题的解决途径
6.
This paper briefly intro-duced the practice of longhole blast shaft-formirg method for blind shaft sinking in Tongshan Copper Mine.
本文简要介绍了深孔爆破成井法在铜山铜矿盲竖井掘进中的实践。
7.
Black of the card
盲孔(纹板上无孔的部分)
8.
Two-stage servo control motor and servo leaping function enable the machine with processing deep holes, blind holes, lateral and large area electrical machining.
快速二段式伺服马达控制及伺服跳动功能，具深孔、盲孔、侧面及大面积电极加工之特性。
9.
If the blind lead the blind, both shall fall into the ditch.
如果由盲人带领盲人，两者将同堕深沟。
10.
Micro-via Filling and Through Hole Plating in one Process in Vertical Line
垂直电镀线盲孔和通孔同步电镀工艺
11.
Drilling 50 yards deep,
钻孔至50码深处，
12.
Study on the Physical and Mechanical Performance of Back Covered Porous Brick and Its Masonry;
盲孔多孔砖及其砌体物理力学性能的试验研究
13.
Blind-hole lower bushing prevents leakage.
"盲孔"下部衬垫能够防止泄漏。
14.
Finishing Technology of Large Diameter Blind Holes in Hydraulic Oil Tank Case
液压油箱壳体大盲孔的光整加工技术
15.
Replace length cut springs to std. springs. Close blind holes.
将定尺弹簧改成标准弹簧.关闭盲孔.
16.
FEM simulation of blind bolt connection based on ANSYS
基于ANSYS的盲孔螺栓联接的有限元仿真
17.
Research on the Process of Buried/blind Via in HDI Rigid-flex Board
HDI刚挠印制板中的埋盲孔工艺研究
18.
blindly or excessively devoted or adoring.
盲目的或过分的深爱或崇拜的。