1.
RESEARCH INTO THE TECHOLOGY OF REMOVING ELECTROLESS Ni-P ALLOYS FROM ALUMINUM BASE ALLOYS SURFACE;
铝合金化学镀Ni-P合金层退镀工艺探讨
2.
Stripping Technology of Nickel Coating on Sintering NdFeB Permanent Magnet
烧结型钕铁硼镀镍层退除工艺的研究
3.
Galvanizing and Continuous Annealing of Dual-Use Technology Research on Existing Hot-Dip Galvanizing Line
在现有热镀锌机组上实现镀锌和退火两用生产的工艺研究
4.
A Research on the New Technique for Rapid Stripping of Cu/Ni/Cr Deposits
快速退除铜/镍/铬等金属镀层新工艺的研究报告
5.
Research on Extracting Cu and Ni from Nitric Stripping Solution and the Recycling Technology
硝酸退镀液中铜镍分离回收与资源化工艺研究
6.
Plating Technology and Properties of Electroless Ni-Mo-P Alloy Coatings
化学镀Ni-Mo-P合金镀工艺及镀层性能
7.
ACCELERATED STRIPPING OF Ni-Fe/Cr OR Cu/Ni/Cr ELECTROPLATES
快速退除镍铁合金/铬、铜/镍/铬镀层新工艺的研究和应用
8.
Study of the Influence of Annealing and Temper-rolling Process on the Mechanical Properties of Deep-Drawing Quality Galvanised sheet
退火与平整工艺对热镀锌深冲钢力学性能的影响研究
9.
The Research on the Corrosion of Plating Bath and the Processes of Electroless Plating Nickel and Electroplating Zinc on Magnesium Alloy;
镁合金镀液腐蚀与镀镍镀锌的工艺研究
10.
Study on the Technology of Electroless Plating and the Properties of Coating;
化学镀镍及复合镀工艺与镀层性能研究
11.
electrochemical etching and replating process
电化腐蚀和电镀工艺
12.
Study on Zn-ZrO_2 Composite Coating Process
Zn-ZrO_2复合镀工艺的研究
13.
Study on Iron Electroplating and Fe-SiC Composite Electroplating Technics;
电镀铁及Fe-SiC复合电镀工艺的研究
14.
Research on the Process of Electroless Ni-P and Performance of Coating on Cr12MoV;
Cr12MoV化学镀镍—磷工艺及镀层性能研究
15.
Micro-via Filling and Through Hole Plating in one Process in Vertical Line
垂直电镀线盲孔和通孔同步电镀工艺
16.
The pre-cleaning is to be performed by electrolytic deoiling. The strip is delivered into reducing annealing furnace after cleaning to improve coating adherence.
采用电解脱脂予清洗工艺,带钢清洗后进入还原退火炉,增加了镀层的结合力。
17.
The key points of the operation and the stripping methods and effects of the defective chromium deposit were introduced.
介绍了各工艺操作中应注意的问题及不良镀铬层的退除方法及效果。
18.
In modern operations tin is generally deposited on the steel plate by electrolytic action.
要现代工艺中，一般是用电镀法将锡镀在钢片上。