1.
THE EFFECT OF MOLYBDENUM POWDER MORPHOLOGY ON FRACTURE PROPERTIES OF MOLYBDENUM WIRE
钼粉形貌对钼丝断裂性能的影响研究
2.
Study on the Preparation and Mechanism of High Performance Molybdenum Powder and Sintered Molybdenum;
高性能钼粉与烧结钼的制备及机理研究
3.
Study on the surface modification of MoS_2 powder with KH570
KH570对二硫化钼粉体表面的改性研究
4.
Sintering behavior of Mo/Cu composite powders prepared by electroless copper plating on molybdenum powders
钼粉表面化学镀铜复合粉末烧结致密化
5.
Method for measuring the distribution of the powder size of tungsten and molybdenum method by the balance for the fall of the particles
GB/T4195-1984钨钼粉末粒度分布测试方法(沉降天平法)
6.
Numerical Simulation Study of Molybde Metallic Powder Warm Compaction Process;
钼粉末温压成形过程的有限元数值模拟研究
7.
The Study of the Post-treatment of the Polymer-coated Molybdenum Powder Parts Formed by Selective Laser Sintering (SLS);
覆膜钼粉激光烧结成型件后处理工艺研究
8.
The Studying of the Laser Sintering and Post-treatment of the Polymer-coated Molybdenum Powder;
覆膜钼粉激光烧结成型及后处理工艺技术研究
9.
Research on the Technology and Quality of Producing Rod Billets by Large Size Molybdenum Powder
大粒度钼粉生产棒坯的工艺及质量研究
10.
Determination of Oxygen in Ultra-Fine Molybdenum Disilicide by Pulse Heating-Infrared Absorption Method
脉冲加热-红外法测定超细二硅化钼粉末中氧
11.
Material properties improvement of molybdenum powder sintered body by forging process
锻造工艺对钼粉烧结体的材料性能的改善
12.
Warm Compaction Technology of Molybdenum Powder Based on Finite Element Method
基于有限元模拟的钼粉末温压成形分析
13.
Preparation of MoS_2 Nanopowder and Its Tribological Properties
纳米二硫化钼粉体制备及其摩擦学性能
14.
THE MEASUREMENT OF HIGH CONTENT OF SILICON IN THE CERAMIC CHALK BY α-Si-Mo ABSORPTION PHOTOMETRY METHOD
α-硅钼黄吸光光度法测定陶瓷粉笔中高含量硅
15.
The Luminescence Properties of M_2(WO_3)_(2-x)(MoO_4)_x: Eu~(3+)(M=Li, Na, K);
稀土钨酸钼酸盐荧光粉发光性能的研究
16.
A Green Synthetic Research on Synthesizing Isobutyl Propionate by Using Solid Mo-Ni Catalyst;
钼镍粉催化合成丙酸异丁酯的绿色合成研究
17.
Synthesis of Tetrahlycol Bischloroacetate by salid Mo-Ni catalyst;
钼镍粉催化剂催化合成氯乙酸四甘醇双酯
18.
Hydrothermal Synthesis and Properties of Red Molybdate Phosphors
钼酸盐红色荧光粉的水热合成及性能研究