1.
Easer: Printing ink additive used to reduce tack.Examples are thin varnish,reducing oil,etc.
减黏剂:用来降低油墨黏度的添加剂。例如稀光漆，减韧油。
2.
Splitting: A serious form of picking. Part of paper surface were torn on the press due to extreme tacky of the ink.
纸面剥离:严重的剥纸情况。因油墨黏度极高,印刷时,纸的部分表层被扯离的情况。
3.
Sticking: Two or more sheets of paper adhered to each other. The cause may be static electricity, too much ink or ink too tacky, etc.
黏着:两张或以上的纸，黏附一起的情况。原因可能是静电，施印墨量多，或墨的黏度高等。
4.
Blister ink: Ink which will blister when heated to a certain temperature. Used for blister printing.
发泡墨:发泡印刷用的油墨。加热到某一温度时就会膨胀的油墨。
5.
"Consistency of substance, as in paint, textiles, or wine."
油漆、纺织品、酒的黏性、强度和稠度。
6.
The Research on the Relationship between Density of Lithographic Ink and Ink Thickness;
胶印油墨叠印密度与墨层厚度关系的研究
7.
Using special type of ink which only adhered to the image areas, the plate does not require damping.
用只黏附于印纹上的特别配方油墨施印，不需用水把版面湿润。
8.
Using Solventless Adhesives with Water-Based Inks in Flexible Packaging
软包装印刷中无溶剂胶黏剂与水性油墨相容性研究
9.
The application of GZL-200 vacuum dehydration oil-filter with high viscosity
GZL-200高黏度真空脱水滤油机的应用
10.
Comparison of Two Measurement Methods of Lubricating Oil Viscosity on the Spot
两种润滑油黏度现场测量方法的比较
11.
Tackmeter: An instrument for determining the degree of tack of an ink.
粘度计:测定油墨粘度的仪器。
12.
Length (ink thread): Pick up a small amount of ink with an ink knife and allow it to flow down and finally string out.
长度（墨丝）:用墨刀带起小量油墨，让它续渐流下成丝。
13.
A design about car oil quality detecting system by oil's viscosity
基于油品黏度的机油品质检测系统设计
14.
CO2 extraction for crude oil and its effect on crude oil viscosity
CO_2对原油的抽提及其对原油黏度的影响
15.
testing methods for kinematic viscosity and calculating method for viscosity index of crude oil and petroleum products
原油及石油产动粘度试验方法及石油产品黏度指数计算方法
16.
Lightfast ink: Ink that will fade less than normal ink on prolonged exposure to strong light.
耐光油墨:在强光照射下，颜色较普通油墨耐久，变淡的程度较低的油墨。
17.
parallel plate viscosimeter (spread-o-meter)
油墨特性线的平行板粘度仪(铺展仪)
18.
Test method for fluidity of printing inks
GB/T14624.3-1993油墨流动度检验方法