1.
"Mechanical seals that employ sprayed or laminated seal faces shall neither be considered equal, nor shall they be acceptable."
采用喷涂密封面或层压密封面的机械密封既与上述密封完全不同,也不能被接受。
2.
The primary and mating seal faces are lapped to a maximum of 3-helium light bands flatness to provide effective sealing and leakage protection.
主密封面和配套密封面叠加成最多3层的轻型带状平面,提高密封和防泄漏效果。
3.
Passing by abrasive of whole hemisphere can be done the sealant,have concentrative wear and tear,sealed well.
整个半球面都可以做密封面，集中磨损少，密封性好。
4.
The inner mechanical seal shall be constructed with a solid block carbon rotating seal face and a solid block silicon carbide stationary seal face.
内置的机械密封结构应该采用一块整体结晶碳旋转密封面和一块整体结晶碳化硅固定密封面。
5.
The outer mechanical seal shall be constructed with a solid block silicon carbide rotating seal face and a solid block silicon carbide stationary seal face.
外置的机械密封应该采用一块整体结晶碳化硅旋转密封面和一块整体结晶碳化硅固定密封面。
6.
Marine pipe flanges--Connection dimensions and mating face
GB/T569-1965船用法兰连接尺寸和密封面
7.
New Stainless Steel Heap Welding Technique for Main Steam Valve Sealing Suface
主蒸汽阀门密封面不锈钢堆焊新工艺
8.
Seal Analysis of Ball Valve Based on ANSYS WorkBench
基于ANSYS WorkBench的球阀密封面分析
9.
mechanical seal with low back pressure
背面低压式机械密封
10.
radial double mechanical seal
径向双端面机械密封
11.
axial double mechanical seal
轴向双端面机械密封
12.
Finite Element Analyse of the Distortion of Sealing Ring of Spiral Groove Gas Face Seals;
螺旋槽气体端面密封密封环变形有限元分析
13.
The Edgy Machine that Takes Assistance Sealing Structure;
带有端面辅助密封作用的刀口机械密封结构
14.
Research on the Sealants to be Used to Fill Cracks and Repair Potholes in Asphalt Roads
沥青路面裂缝填封和坑槽修补用密封胶的研制
15.
Practics of Transforming End Seals of 300m~2 Sintering;
300m~2烧结机机尾两道密封改为一道密封增加烧结有效面积的实践
16.
Influence of Dimple Diameter on Dynamic Performance of Gas Multi-pored Face Mechanical Seal
气体多孔端面机械密封孔径尺寸对密封动态性能影响研究
17.
Development of E-Shaped Double-Sided Active Sealing Flange Seal Ring for the Braking Pipeline System
制动管系用E形双面主动密封法兰密封圈的研制
18.
FEM analysis on several hetero-shaped cross-section seal structures for large gaps sealing
大缝隙密封的几种异型截面橡胶密封结构的有限元分析