1.
Tensile Deformation Behavior of Fine-Grained TC4 Titanium Alloy at High Temperature;
细晶TC4钛合金高温拉伸变形行为研究
2.
Study on the Tensile Deformation and Fracture Behavior of Spray Deposition 7075Al/SiC_p Composites Sheet at Elevated Temperature;
喷射沉积7075Al/SiC_p复合材料板高温拉伸变形与断裂行为研究
3.
determination of tension set at high temperatures for vulcanized or thermoplastic rubber
硫化橡胶或热塑橡胶高温拉伸下拉伸久变形和蠕变的测定
4.
Special Drawing Methods That Could Improved Drawing Deformation Degree
能提高拉伸变形程度的特殊拉伸方法
5.
Deformation Behavior of AZ31 Mg Alloy at Worm Temperatures
AZ31镁合金板温拉伸变形行为的研究
6.
Tensile Creep Behavior of a 3D-C/SiC Composite at Elevated Temperature;
3D-C/SiC的高温拉伸蠕变性能
7.
Flow Behavior of Low Alloy Steel FQK400 During Stretching at High-temperature
低合金钢FQK400高温拉伸的流变特性
8.
Analysis on tensile deformation and fracture behaviors of grain oriented electrical steels at low temperature
取向电工钢的低温拉伸变形和断裂行为
9.
Development of software of true stress-true strain computation and analysis for high-temperature tension
高温拉伸真应力-真应变计算分析软件开发
10.
friction-twist draw-texturing machine
摩擦加捻拉伸变形机
11.
spin-draw-texturing machine
纺丝-拉伸-变形联合机
12.
Influence of Secondary Stretching Temperature on Configuration Change of Microvoids in Polyacylonitrile-based Precursor Fibres
二次拉伸温度对PAN原丝中微孔洞形貌变化的影响
13.
The results of the tensile test indicate that the composite exhibit relatively high strength both at room temperature and high temperature.
拉伸试验结果表明,该种复合材料具有较高的室温和高温拉伸强度。
14.
In-situ Observation of High-temperature Tensile Process of Fe16Mn0.6C High Manganese Steel
Fe16Mn0.6C高锰钢高温拉伸过程原位观察
15.
test method for tensile heat distortion temperature of plastic sheeting
塑料板材的拉伸温度变化测定法
16.
Mechanical behavior of PMMA under different temperatures and strain rates
不同温度和应变率下PMMA拉伸性能
17.
Metallic materials--Tensile testing at elevated temperature
GB/T4338-1995金属材料高温拉伸试验
18.
Tensile Strength of C/Al Composites at High Temprature
碳(石墨)/铝复合材料的高温拉伸强度