1.
Study on Improving the Fusibility of Shenhua-coal-ash;
提高神华煤灰熔融温度和熔融性的研究
2.
Melting temperature distribution characteristic of ash deposits of black liquor coal slurry on furnace wall
黑液水煤浆炉壁灰沉积物熔融温度分布特性
3.
Influence of Additives on Vitrified Bond Melting Temperature of CBN High-speed Grinding Tool
添加剂对CBN高速磨削工具用陶瓷结合剂熔融温度的影响
4.
The yield, molecular weight, polar comonomer content and melting temperature of the poly(olefin-ester)s can be controlled by the change of polymerization reaction condition.
改变聚合条件，可控制烯烃共聚酯的分子量、极性单体插入率和熔融温度等性质。
5.
DEVELOPMENT OF IDENTIFYING SOFTWARE FOR FUSIBILITY OF COAL ASH BY USING Visual C++
用Visual C++开发煤灰熔融特征温度识别软件
6.
The Numerical Simulation for Temperature Field of MCFC Stack;
熔融碳酸盐燃料电池堆温度场的数值模拟
7.
Tests of Homogenization Temperature and Volatile Content of Melt Inclusions
熔融包裹体均一温度及挥发组分含量测试
8.
Analysis on factors influencing the accurate determination of coal ash fusibility temperature
准确测定煤灰熔融性温度的影响因素分析
9.
The key points are caloric value of coal, the fusing characteristics of coal ash and the temperature at furnace center.
其要点是煤的热值，煤灰的熔融特性以及炉膛的中心温度。
10.
Manufacture and Properties of Melt-Spun Heat-storage and Thermo-regulated Fiber Containing Microencapsulated Phase Change Materials;
熔融纺丝法智能温度调节纤维的研制与性能分析
11.
Rapid growth of“ mother dendrites” in a given location of a melt at just below the liquidus temperature, that growth being the result of rapid heat extraction from the melt, or from recalescence.
在特定的熔点，以低于液相线的温度快速生成“母晶枝”，这是使熔融金属或复辉快速散热的结果。
12.
melting point type disposable fever thermometer
熔点型消耗式温度计
13.
fusible-element-type fixed temperature detector
易熔合金温度探测器
14.
Now, the consumptive optical fiber radiation thermometer developing is a new method of the temperature measurement for melted metal.
现在，开发的消耗型光纤辐射温度计是一种全新的测量熔融金属温度的方法。
15.
Equilibrium Comparison
金属的相融、相融温度、晶体反应及合金在共晶合金、固熔孻共晶合金及偏晶反应的比较
16.
For example, a variation of20% in the feed rate causes a9% increase or decrease in pressure, which is a variability range of18%.
温度恒定时，熔融粘度变化通常是由于投料速率变化和/或混和不均导致的。
17.
The warm-up device can reduce the temperature difference between the cloth and the molten film, so it improve the intensity of antis tripping, reduce the gaffer of the film.
预热装置缩小了材料和熔融薄膜的温度差，保证了涂覆后抗剥离强度高，减轻涂覆后的皱褶。
18.
The addition of a plasticizer may lower the melt viscosity, elastic modulus, and glass transition temperature (Tg) of a plastic.
同时,加入增塑剂,还可以降低塑料在熔融态时的粘度、弹性模数及玻璃转变温度(tg)。