1.
The application of joint support technology of high strength anchor arm and anchor cable
高强度锚杆和锚索联合支护技术的应用
2.
Application of High strength Bolt and Cable Anchor Combined Supporting in Driving Fault Seam
高强度锚杆、锚索联合支护在过断层中的应用
3.
Study on Causes and Measures of High-strength Bolt Supporting Failure
高强度锚杆失效原因分析及对策研究
4.
Study on Air-cooled Mn-B Bainitic Steel for High Strength Anchor Bolt
高强度锚杆用空冷Mn-B贝氏体钢的研究
5.
The Research on and Application of the Bolt Supporting Technique with Higher Active Supporting Performance and Higher Utilization Rate of Material Strength
高主动支护性与高材料强度利用率锚杆支护技术的研究与应用
6.
The Anchoring Mechanism of High-strength Prestressed Anchor and Time-dependent Deformation Analysis of Bolted Rock Mass;
高强预应力锚杆的锚固机理及时效性分析
7.
On supporting and reinforcing of strengthen anchor arm and bolting sustaining in soft rock lanway
软岩巷道高强锚杆和锚注支护加固机理分析
8.
Escorting Roadways along Goaf by Using Support Technology with High Strength Resin Bolt
应用高强树脂锚杆支护技术沿空送巷
9.
Reinforcement Mechanism of Anchored Bolt for Coal Pillar and Analysis of Influence Factors of Pillar Strength
煤柱锚杆加固机理与煤柱强度影响因素分析
10.
In this paper, FEM and BEM coupling algorithm was applied in Mu Cheng Jian Coal Mine, under two conditions, namely the work face gateway, open-off cut of540203 and+570 No2.
锚杆支护的作用在于加大巷道围岩的围压,从而提高围岩的强度而保持其稳定性。
11.
Brief Talks of Enhancing the Speed of Rapid Excavation of Comprehensive Bolting Support Tunnel
提高综掘锚杆支护巷道快速掘进速度的探讨
12.
Research on Bond Mechanism of GFRP Bolt;
玻璃纤维增强塑料锚杆锚固机理研究
13.
Anchorage Systems of High Strength Fiber Reinforced Polymer and the Applications in Strengthened Structure;
高强度复合材料FRP片材波形齿夹具锚锚固系统及应用研究
14.
the shank of an anchor, a key, a golf-club
锚杆、 钥匙柄、 高尔夫球棒的杆.
15.
On application of anchor jacked pile in reinforcing and strengthening foundation
锚杆静压桩在地基加固补强中的应用
16.
COMPREHENSIVE RESEARCH OF CRITICAL ANCHORAGE LENGTH PROBLEM OF ROD OF ANCHORAGE STRUCTURE
锚固类结构杆体临界锚固长度问题综合研究
17.
Study on Anchor (Cables) Supporting in Large Span Section Open-off Cut;
大跨度切眼巷道锚杆（索）支护技术研究
18.
Research on the Automatic Delimited Angle System of CMM25-4 Type Bolt Drilling Cars
CMM25-4型锚杆钻车自动分度系统的研究