1.
worsted speed frame
精梳毛纺有捻粗纱机
2.
worsted rubbing frame
精梳毛纺无捻粗纱机
3.
The change of roving machine and its advantages of packet transmission driving
棉纺粗纱机的变迁和分组驱动粗纱机的优越性
4.
Prevention of Spinning Defects with Closed Drape Flyer in Roving Machine
粗纱机闭式悬锭锭翼纺纱疵点的防治
5.
Development of roving frame control system independently driven by multi-motor
多电机独立驱动粗纱机控制系统开发
6.
Stretch in roving due to improper tension in the roving.
由于粗纱机成型过程中张力不合适造成粗纱伸长不匀。
7.
Research on the Initial Spinning Tension Adjustment about FA498
FA498型粗纱机始纺张力调整的研究
8.
Application of Omron Inverter in the Triaxial Roving Machine
Omron变频器在三轴粗纱机中的应用
9.
Practice of Modifying Roving Evenness in A454 Roving Machine
在A454型粗纱机上改善条干CV值的实践
10.
Slivers from the finisher drawing are taken to the roving frame, where each sliver will be attenuated until it measures approximately one -eighth of its original diameter.
从末道并条出来的熟条直接供给粗纱机。在粗纱机上,棉条被拉细至约为原来直径的1／8。
11.
Product Platform Design of Flyer Frame under Mass Customization
面向大规模定制粗纱机产品平台的设计
12.
Generalized Modular Design and Software Development Technique of Flyer Frame;
粗纱机广义模块化设计及其软件实现技术
13.
Function of the cotton spinning roving frame with suspending flyer at the wool semi-combing spinning
棉纺悬锭粗纱机在半精纺工艺中的作用
14.
The roving goes directly to the spinning frame where the roving is drawn out to the desired size.
粗纱被直接送入细纱机。在细纱机上,粗纱被牵伸至所需要的细度。
15.
Several types of spinning systems have been used in making woolen yarns, for example mule spinning, ring- frame spinning, etc.
生产粗梳毛纱的细纱机种类很多,例如走锭纺纱机、环锭纺纱机等。
16.
After combing, the comb sliver is drafted or drawn to form a roving, which is delivered to a spinning frame where the final worsted yarn is made.
经精梳机后,精梳毛条再去被牵伸成粗纱,粗纱再由细纱机加工。最终的纱线在细纱机上生成。
17.
The roving is fed down into the spinning area, where it feeds between sets of rollers.
粗纱从细纱机的上方喂入,并通过一对对的罗拉。
18.
Excessive stretch in roving due to improper function of builder mechanism in speed frame.
由于粗纱成形机构的速度不合理导致粗纱伸长过大。