1.
Modification for Spindle Support of Temper Mill;
对平整机万向接轴托架的改造—由固定式改为浮动式
2.
Remove nut securing pedal shaft in support bracket.
拆卸支撑托架上连接踏板轴的螺帽。
3.
The carriage is supported on guide shafts.
托架支承在导轴上。
4.
Remove nuts attaching splash shield and caliper bracket to axle tube flange.
拆卸连接挡泥板和夹制器托架至车轴套管的螺帽。
5.
Remove thrust bearings from rear main bearing carrier.
从后主轴承托架上拆下止推轴承。
6.
voltage regulator contact bracket
电压调整器接角点托架
7.
current regulator contact bracket
电流调节器接角点托架
8.
bracket stub-axle for road motor vehicles or tractors
道路机动车辆或拖拉机用短轴托架
9.
Behaviour of Semi-Rigid Beam-to-Column Minor Axis Connections in Steel Frames;
钢框架梁柱弱轴半刚性连接性能研究
10.
Connection of the cables to the deck is accomplished in a bracket.
钢索与桥面连接在托架上。
11.
The bail connecting the most inferior gimbal axis to the next gimbal axis mounts the meridian accelerometer.
把最里面的框架轴与第二框架轴连接在一起的框架上安装了子午线加速度计。
12.
The Study on Indirect Squeeze Casting of the Larger-diameter Retainer;
大直径轴承保持架间接挤压铸造的研究
13.
Design and study of control system for welding roller frame against axial displacement;
防轴向位移焊接滚轮架控制系统的设计与研究
14.
Study on Behavior of Beam-to-column Minor Axis Connections Jointed by Double-angle in Steel Frame
钢框架梁柱弱轴双角钢连接受力性能研究
15.
Study on Behavior of Beam-to-Column Minor-Axis End-plate Connections in Steel Frame
钢框架梁柱弱轴端板连接受力性能研究
16.
The Seismic Behavior Analysis of Steel Frame Beam-to-Column Web Connection with Bolted-Splicing
钢框架梁柱弱轴螺栓拼接节点的抗震性能分析
17.
The Improvement of Connecting Pin-lubrication in Tension Roller Compactor Frame
张力压紧辊架连接销轴润滑方式的改进
18.
Failure Analysis on Bearing with Dowels Welded to Frame in Huge Roll Mill
大型轧机柱销焊接保持架轴承失效分析