1.
Study on Mechanical Property and Solder ability of SnAgCu System Lead-free Solder Alloy
SnAgCu系无铅钎料合金力学性能及钎焊性能研究
2.
Study on Soldering Procedure and Joint Properties of Down Quenching SnAgCu Solder Alloy
急冷型SnAgCu系钎料合金钎焊工艺及接头性能研究
3.
Study on Cu-Ag-Si-Ga Series Brazing Filler Alloys with Low Vapour Pressure
Cu-Ag-Si-Ga系低蒸气压钎料合金研究
4.
Solidified structural characteristics of rapid solidified Sn2.5Ag0.7Cu solder alloy
快速凝固Sn2.5Ag0.7Cu钎料合金凝固组织特征
5.
Study of the Effect of CuP14 on Sn-Zn Solder Alloy System;
CuP14合金对Sn-Zn系钎料合金的性能影响研究
6.
Aluminum Alloy Soldering Procedure Research Based on the Sn-Pb-Zn Solder;
基于Sn-Pb-Zn钎料铝合金钎焊工艺研究
7.
A Study on the Active Brazing of AlN to W-Cu Alloy with Ag-Ti_4 Active Filler Alloy
Ag-Ti_4活性钎料钎焊AlN与W-Cu合金研究
8.
spelter brazing alloy
铜锌基硬钎焊料合金
9.
The Study of Low-Melting-Point Filler Metal for Al-Si-Mg Series Alloys Vacuum Brazing;
Al-Si-Mg系锻铝合金真空钎焊低熔点钎料的研究
10.
Effect of Alloy Element Addtion on IMC at the Soldering Interface of Sn-based Binary Solders;
合金元素对二元Sn基钎料钎焊界面IMC的影响
11.
Brazing Materials and Process of High-density Graphite to TZM Alloy;
石墨与钼合金钎焊材料与钎焊工艺的研究
12.
The Manufacturing of Filler Metal and the Joining of TiAl Alloys;
TiAl基合金高温钎焊钎料配制及连接工艺研究
13.
Study on Brazing of Cemented Carbide to Steel Using Cu-Based Microcrystalline Brazing Alloy Foils;
基于Cu基微晶钎料的硬质合金/钢钎焊试验研究
14.
Brazing of IC10 superalloy with Ni-based brazing fillers using Hf and Zr as melting-point depressants
Hf与Zr为降熔元素镍基钎料对IC10合金的钎焊
15.
Phase Constitution of Soldering Seam and Mechanical Properties of Zn Matrix Filler Metal Soldering Magnesium Alloy AZ31B Joint
Zn基钎料钎焊镁合金AZ31B接头的钎缝物相及力学性能
16.
Brazed Interface Microanalysis of Carbon-fiber Reinforced Composite Material and Titanium Alloy by Brazing Filler Metal Containing Ti Element
含Ti钎料钎焊碳纤维复合材料与钛合金的界面微观分析
17.
Study on the Filler Metal for AZ31B Magnesium Alloy and Property of the Joint;
AZ31B镁合金钎料及接头性能研究
18.
Effects of Pb on Properties of Sn3.5Ag0.5Cu Alloy Solder
铅对Sn3.5Ag0.5Cu合金钎料性能的影响