1.
The Control System of the Beam blank Caster of Laiwu Steel Group
莱钢异型坯连铸机控制系统的研究与应用
2.
Trouble - shooting of Beam Blank Caster Dummy Bar Storage Device;
异型坯连铸机引锭杆存放装置故障分析及处理方法
3.
QUALITY PROBLEMS AND COUNTERMEASURES FOR NEAR-NET-SHAPE CC OF BEAM BLANKS
近终形连铸异型坯的质量问题及对策
4.
Research on Defects of 09CuPCrNi-A of Beam Blank Continuous Casting;
09CuPCrNi-A耐候钢连铸异型坯缺陷分析
5.
Production practice on casting the round tube blank of steel 20 with round tube blank continuous caster
圆坯连铸机浇铸20钢铸坯的生产实践
6.
STUDY OF MACRO-INCLUSION BEHAVIOR OF NEAR EVENTUALLY BEAM BLANKS
近终形异型连铸坯中大型夹杂物行为研究
7.
Optimization of Processing Technology of Continuous Casting Beam Blank;
提高连铸异型坯质量的生产工艺优化研究
8.
Technics Study of Reducing Longitudinal Surface Crack of Beam Blank
减少连铸异型坯表面纵裂纹的工艺研究
9.
Optimization on Mould Powder of Weathering Steel Beam Blank Continuous Casting
耐候钢异型坯连铸结晶器保护渣性能优化研究
10.
Study on Micro-inclusions Behavior of Beam Blanks
近终形异型连铸坯中显微夹杂物行为研究
11.
Application of magnisian coating material on tundish of three-strand shaped blank CCM
镁质涂料在三流异形坯连铸机中间罐上的应用
12.
Simulation Study and Industrial Practice of Double SENs in Beam Blank Mold
异型坯连铸双浸入式水口浇铸技术模拟研究及工业实践
13.
EXPERIENCE OF REVAMPING SMALL BELGIAN MILL TO CONTINUOUS CASTING BLOCK TO FINISHED PRODUCTION WITHOUT REHEATING
横列式小型轧机改造成用连铸坯—火成材的经验
14.
Research of The Control Technology of Dynamic Soft Reduction for Jumbo Bloom Caster
大型方坯连铸机动态轻压下控制技术的研究
15.
Water Model Study on the Optimization of Slab CC Tundish Configuration at Lingang
板坯连铸机中间包结构优化的水模型研究
16.
The Application and Investigate of the Moldexpert System in the CCM
基于结晶器专家模型控制系统的大板坯连铸机
17.
Studies on Shell Deformation in H～2 Mould of FTSC Thin Slab Caster;
FTSC薄板坯连铸机H～2型结晶器内坯壳变形过程的研究
18.
Optimization of secondary cooling scheme of combined caster
方/板坯连铸机浇铸矩形坯二冷制度优化