1.
Study on Processing Technology and Brazing Performance of Ag55Cu21Zn17Sn5Ge2 Solder
Ag55Cu21Zn17Sn5Ge2钎料加工工艺及其钎焊性能的研究
2.
Study on Mechanical Property and Solder ability of SnAgCu System Lead-free Solder Alloy
SnAgCu系无铅钎料合金力学性能及钎焊性能研究
3.
The Experimental Research on Brazing Process of Fe_3Al and High Temperature Heat-resistant Alloy
Fe_3Al与高温耐热合金的钎焊性能研究
4.
Study on the new type soldering acid and filler metal for restoration of ancient bronze;
古代青铜器修复钎焊用钎剂与钎料的改性研究
5.
The Research on Properties and Bonding Mechanism of Armorphous Cu-P Filler Metals;
非晶Cu-P钎料的性能及钎焊机理研究
6.
A Study on the Active Brazing of AlN to W-Cu Alloy with Ag-Ti_4 Active Filler Alloy
Ag-Ti_4活性钎料钎焊AlN与W-Cu合金研究
7.
Characteristics of Amorphous Brazing Ribbon of Cu-P Based Alloy
非晶态铜磷钎料真空钎焊紫铜的性能
8.
Study on Weldability and Microstructure of Brazing Cubic Boron Nitride;
钎焊立方氮化硼的焊接性与微观结构
9.
Weldability and Microstructure of Copper Joints Welded by Two Kinds of Phosphor-copper Brazing Filler Metal
两种铜磷钎料对紫铜钎焊的焊接性能和焊缝组织对比
10.
Research on the New Lead-Free Solder Processing Properties of Brazing and Mechanical Properties;
新型无铅钎料钎焊工艺性及机械性能的研究
11.
Microstructure and properties of BCu80Ni5SnTi active filler metal for brazing cubic boron nitride
钎焊立方氮化硼BCu80Ni5SnTi活性钎料的组织与性能
12.
Study on Preparation and Brazing Diamond Film of Active Coated Brazing Filler Metal;
活性涂层钎料的制备及其钎焊金刚石膜的研究
13.
Effect of Cr on Property of Stainless Steel Joint Brazed with Series Ni-P Filler Metal
Cr对Ni-P系钎料钎焊不锈钢接头性能的影响
14.
Influence of Cu on Properties of Zn-Al Solders for Al/Cu Brazing
Cu元素对铝/铜钎焊用Zn-Al钎料性能的影响
15.
Microstructure and Mechanical Property of Joint by Amorphous Fillers
非晶镍基钎料钎焊接头性能及微观组织的研究
16.
Study on Soldering Procedure and Joint Properties of Down Quenching SnAgCu Solder Alloy
急冷型SnAgCu系钎料合金钎焊工艺及接头性能研究
17.
Research the Influence on Mechanics Performance of Jointing Techniques Parameter
钎焊工艺参数对钎缝组织性能影响的研究
18.
Phase Constitution of Soldering Seam and Mechanical Properties of Zn Matrix Filler Metal Soldering Magnesium Alloy AZ31B Joint
Zn基钎料钎焊镁合金AZ31B接头的钎缝物相及力学性能