1.
Fuzzy optimal design facing cavity wall thickness of large-scale die casting mold
面向大型压铸模型腔壁厚的模糊优化设计
2.
Design method of the vacuum die-casting mould for large-scale thin shell part
大型薄壁件真空压铸模具的设计方法
3.
Optimization Design of Die-Casting Die Structure for the Large-Scale Launching Base
大型发射座腔体压铸模结构优化设计
4.
Study on Material of Ductile Cast Iron and Numerical Simulation of Lost Foam Casting for Large-size Punching Dies;
中大型冲压件模具球墨铸铁材料及消失模铸造数值模拟研究
5.
Numerical Simulation and Optimization for Counter-pressure Casting Process of Large-scale Thin-wall Al Alloy Cylindrical Casting
大型薄壁铝合金筒体铸件差压铸造过程数值模拟与工艺优化
6.
Development and Application of Dynamic Soft Reduction Control Model in Bloom Continuous Casting Machine
大方坯连铸动态轻压下控制模型的开发与应用
7.
Numerical Simulation of Filling and Solidification Process for Casting by Low-Pressure Casting;
低压铸造铸件充型凝固过程数值模拟
8.
Impact of Joint Face of Casting Die to Craft Character;
论压铸模分型面对铸件工艺性的影响
9.
Research and Application of Soft Reduction Model for 280mm×325mm Bloom Continuous Casting Machine with Dynamic Soft Reduction
280mm×325mm大方坯连铸动态轻压下压下模型的研究与应用
10.
Study of Die-casting Technology of Large-sized Retainer Copper Alloy and Die Steel;
大型铜合金轴承保持架压铸工艺及模具用钢的研究
11.
Stress Analysis and the Numerical Simulation for Complicated Die-casting of the Magnesium Alloy;
大型复杂镁合金压铸件的应力分析数值模拟研究
12.
Counter-pressure Casting Process Design of Large Thin-wall Al Alloys Cylindrical Casting Based on Numerical Simulation
基于数值模拟的大型薄壁铝合金件差压铸造工艺设计
13.
Development and Application of Dynamic Secondary Cooling and Dynamic Soft Reduction Control Model for Bloom Caster
大方坯连铸动态二冷与动态轻压下控制模型的开发与应用
14.
Digital Simulation of Squeeze Casting of ZA27 Alloy with Large Ratio of Height to Diameter;
大高径比ZA27合金铸件挤压铸造过程数值模拟
15.
Extrusion Casting Application in Production of Largescale Complex Casting of Aluminum Alloy;
挤压铸造在大型复杂铝合金铸件生产中的应用
16.
Elimination of Shrinkage Porosity in Low Pressure Casting Large Castings with Varied Thickness
低压铸造大型壁厚不均铸件缩松的解决
17.
Computer Simulation of Liquid Metal Flow into Diecasting Cavity
压铸型腔金属液流动的计算机模拟
18.
Mould filling of low-pressure expendable pattern casting process for magnesium alloys
镁合金真空低压消失模铸造充型特征