1.
The Research on Calculation of Springback and Shape Adjusting for Adjustable Plate Forming Device
基于活络式板材成形装置板材回弹量及压点调形计算的研究
2.
Research on the formability of 2E12 aluminum alloy
2E12铝合金板材成形性能试验研究
3.
Research on Forming Limits of Sheet Metal Basing on Continuum Damage Mechanics;
基于连续损伤力学的金属板材成形极限研究
4.
Modularization Development of Pre-and Post-Processors of CAE Software KMAS for Sheet Forming Based on COM;
板材成形CAE软件KMAS前后处理器的COM组件化开发
5.
Technological Parameter and Forming Rule Study of Metal Sheet's Laser Forming
金属板材激光成形工艺参数及成形规律研究
6.
Research on the Key Problems of NC Incremental Sheet Metal Forming;
金属板材数控渐进成形关键技术研究
7.
Study on Laser Bending for Metal Sheets and Mechanism;
金属板材激光弯曲成形及其机理研究
8.
Hot Formability of Ti-Ni Alloy Sheet;
Ti-Ni合金板材热成形性能研究
9.
Research on Gas Bulging Forming of AZ31 Magnesium Alloy Sheet in High Temperature;
AZ31镁合金板材高温气胀成形性能研究
10.
Study on Numerical Simulation and Experimental Research of Sheet Metal HydroForming;
板材液压成形的数值模拟及实验研究
11.
Finite Element Simulation of Sheet Metal Deep Drawing Process;
金属板材深冲成形过程的有限元模拟
12.
Hot Drawing Forming and Simulation of AZ31B Magnesium Alloy Sheet;
AZ31B镁合金板材热拉深成形及数值模拟
13.
Research on the Drawability Properties of AZ31B Magnesium Alloy Sheets on Warm Forming
AZ31B镁合金板材温成形冲压性能研究
14.
A Study on Surface Reconstruction of Sheet Metal CNC Incremental Forming
金属板材数控渐进成形曲面重建研究
15.
The Factors of Effecting the Punching Properties of Megnesium Alloys
影响镁合金板材冲压成形性能的因素
16.
A New Process of Hydro-mechanical Deep Drawing for Magnesium Alloy Sheets at Gradient Temperature
镁合金板材液压梯温拉深成形新工艺
17.
Research on the property of 6061 alloy sheet drawing
6061铝合金板材冲压成形性能研究
18.
Forming limits and cavitation behaviors of superplastic Al6061/20SiC_w sheet
Al6061/20SiC_w板材的超塑成形极限与空洞行为