1.
Research on the Key Problems of the Industrial Electromagnetic Soft-Contact Mold;
电磁软接触结晶器工业化关键问题研究
2.
Experiment Study of Magnetic Field Distribution in the Intermediate Frequency Soft-Contact Electromagnetic Continuous Casting Mold for Round Billets
圆坯中频电磁软接触结晶器内磁场分布实验研究
3.
Numerical Simulation of Electromagnetic Field in Electromagnetic Soft-contact Continuous Casting Mold;
软接触电磁连铸结晶器内电磁场的数值模拟
4.
Study of Meniscus Shape in Mold of Medium-Frequency Soft- Contact Electromagnetic Continuous Casting for Round Billets
圆坯中频电磁软接触连铸结晶器内弯月面研究
5.
Meniscus Behavior in Mold of Main Frequency Soft-contact Electromagnetic Continuous Casting for Round Billets
圆坯中频电磁软接触连铸结晶器内弯月面行为的研究
6.
Analysis of Meniscus Fluctuation in Mold for Round Billets by IF Soft-Contact Electromagnetic Continuous Casting
圆坯中频电磁软接触连铸结晶器内弯月面波动分析
7.
Numerical Simulation of Magnetic Field Distribution in Intermediate-Frequency Soft-Contact Electromagnetic Continuous Casting Mold for Round Billets
圆坯中频电磁软接触连铸结晶器内磁场分布数值模拟
8.
Numerical Simulation of Molten Flow in Medium-Frequency Soft-Contact Electromagnetic Continuous Casting Mold for Round Billets
圆坯中频电磁软接触连铸结晶器内钢液流动的数值模拟
9.
Softening and Recrystallization of Cu-Ag Alloy for Cu Cladding Al Contact Wire
铜铝复合接触线用银铜合金的抗软化性和再结晶
10.
Bonding Interface- The area where the bonding of two wafers occurs.
绑定面-两个晶圆片结合的接触区。
11.
Software Pipelining on Transport Triggered Architecture
传输触发体系结构处理器的软件流水
12.
The Software Development of Mould Oscillation Detection and Analysis System;
结晶器振动检测与分析系统软件开发
13.
Influence of barrier height of the front contact on the amorphous silicon and microcrystalline silicon heterojunction solar cells
前端接触势垒高度对非晶硅和微晶硅异质结太阳电池的影响
14.
Finite Element Simulation and Structural Optimization of Permanent Magnet Contactor
永磁接触器的有限元分析及结构优化
15.
point-contact triode
点接触型晶体三极管
16.
treadle rail contact
轨道接触器， 踏板
17.
liquid-liquid centrifugal contactors
液--液离心接触器
18.
Lift the reservoir far enough to access the washer pump wire harness connectors and hoses.
拿起储液槽，距离使我们能接触到清洗器泵电线束接头和软管为宜。