1.
Prediction of radial crack of the workpiece during the splitting spinning based on ductile fracture criteria
采用韧性断裂准则预测分形旋压径向开裂
2.
Prediction of the forming limit of sheet metals based on Oyane ductile fracture criterion
基于Oyane韧性断裂准则的板料成形极限预测
3.
Theoretical and Experimental Research on Choosing Criterion and Critical Value of Ductile Fracture
韧性断裂准则与阀值选取的理论及试验研究
4.
Recent research advance of application of ductile fracture criteria in sheet metal forming process
韧性断裂准则在板料成形中应用研究进展
5.
Study on Meso-Damage Model and Ductile Fracture Criterion in Metal Forming Processes
金属成形过程的细观损伤力学模型及韧性断裂准则研究
6.
Intrinsic relation between fracture toughness criterion, Irwin criterion and Coulomb criterion
断裂韧性判据Irwin准则与coulomb准则的内在联系
7.
The Relationship of Rock Strength Criteria and Fracture Toughness
浅析岩石强度准则与断裂韧度的关系
8.
The steel trea-ted with this pruccss shows a fractograph with quasi-cleavage and dimple。
钢的断口为准解理十韧窝属于韧性断裂。
9.
The fractograph exhibited typical ductile dimple fracture pattern.
断裂形式呈韧性断裂,断口以韧窝为主。
10.
The alloys occur ductile fracture after annealing.
合金热轧态呈脆性准解理断裂,退火后转变为韧性断裂。
11.
AN APPROCH TO THE RELATIONSHIP BETWEEN THE FRACTURE TOUGHNESS OF NOTCH AND THE FRACTURE TOUGHNESS OF CRACK
切口断裂韧性与裂纹断裂韧性之间关系的探讨
12.
The tesile fracture is mixture of quasicleavage and touph dimple.
拉伸断口为韧窝和准解理混合断裂。
13.
The Research of J～* Integral in Elastic-Plastic Fracture Mechanics and Fracture Criterion for Mixed Mode Crack Propagation;
弹塑性断裂力学之J～*积分与复合型裂纹扩展断裂准则的研究
14.
The fracture mode changed from quasi-cleavage plus cleavage obtaioed from conventional treatment to quasi-cleavage plus dimple.
微观断口由常规工艺的准解理加解理断裂变为准解理加韧?断裂。
15.
Fracture criterion for mixed mode crack of composites based on the crack tip plastic zone
基于裂尖塑性区的复合材料复合型裂纹断裂准则
16.
FRACTURE TOUGHNESS MEASUREMENT OF ROCK WITH FRACTAL CRACKS USING HYDRAULIC FRACTURING
水力致裂法测定分形裂纹下岩石的断裂韧性
17.
Impact of Tempering Temperature on Fracture Toughness of High Tenacious Steel(GDL-1)
回火温度对GDL-1高强韧新材料断裂韧性的影响
18.
Method for Determining Elasto-plastic Fracture Toughness of Lce
冰的弹塑性断裂韧性测定方法的研究