1.
The fractograph exhibited typical ductile dimple fracture pattern.
断裂形式呈韧性断裂,断口以韧窝为主。
2.
The steel trea-ted with this pruccss shows a fractograph with quasi-cleavage and dimple。
钢的断口为准解理十韧窝属于韧性断裂。
3.
Study on Mechanism and Criterion for Brittle/Ductile Fracture and Theory of Crack-tip Deformation;
脆性/韧性断裂机理与判据及裂尖变形理论研究
4.
Prediction of radial crack of the workpiece during the splitting spinning based on ductile fracture criteria
采用韧性断裂准则预测分形旋压径向开裂
5.
Whereas the alloy with low Na content exhibited ductile fracture with dimples.
而钠含量较高的合金发生韧性断裂,断口为韧窝型.
6.
The alloys occur ductile fracture after annealing.
合金热轧态呈脆性准解理断裂,退火后转变为韧性断裂。
7.
AN APPROCH TO THE RELATIONSHIP BETWEEN THE FRACTURE TOUGHNESS OF NOTCH AND THE FRACTURE TOUGHNESS OF CRACK
切口断裂韧性与裂纹断裂韧性之间关系的探讨
8.
FRACTURE TOUGHNESS MEASUREMENT OF ROCK WITH FRACTAL CRACKS USING HYDRAULIC FRACTURING
水力致裂法测定分形裂纹下岩石的断裂韧性
9.
Impact of Tempering Temperature on Fracture Toughness of High Tenacious Steel(GDL-1)
回火温度对GDL-1高强韧新材料断裂韧性的影响
10.
Method for Determining Elasto-plastic Fracture Toughness of Lce
冰的弹塑性断裂韧性测定方法的研究
11.
Their fracture toughness and hardness were determined with Vicker's indentation test machine.
在维氏硬度仪上测试断裂韧性和硬度。
12.
Characterization and Measurement of Metals Dynamic Fracture Toughness;
金属材料动态断裂韧性的表征与测试
13.
Research on Improving Fracture Toughness of Corrosion Resistanced Ultrahigh-Strength Steel;
提高耐蚀超高强度钢断裂韧性的研究
14.
Study of Fracture Toughness of 7A04(LC4) Ultra-High Strength Aluminum Alloys;
7A04（LC4）超高强铝合金断裂韧性研究
15.
Investigation on the correlation between fracture toughness and impact energy for middle strength steel;
中强钢断裂韧性和冲击功关系的研究
16.
Measuring fracture toughness J_(IC) of 50Mn frame steel by J integral;
J积分法测50Mn结构钢的断裂韧性J_(IC)
17.
CTOD Fracture Toughness Test for Weld Seam of Q370qE of Bridge
桥梁钢Q370qE焊缝断裂韧性CTOD试验研究
18.
Research on Fracture Toughness and Failure Assessment Curves of X80 Pipeline Steel
X80管线钢断裂韧性及失效评估图研究