1.
Discussion on Strip Butt-welding Method of CT80 Grade Coiled Tubing Made in China
国产CT80级连续油管用钢带对接焊焊接方法探讨
2.
Automatic submerged arc welding is the method for medium/ thick plate welding, but it mainly to be used in flat welding and fillet welding.
埋弧自动焊是焊接中厚板常用的焊接方法,但常规用在平、角焊位置的焊接。
3.
The welding methods, heat-affected zone, and design method of weld strength are introduced.
文中介绍铝合金的焊接方法、接热影响区以及焊接强度的设计方法。
4.
This article breifly introduces polymer matrix composites and highights a number of welding processes, such as hot plate welding, infrared welding, induction welding, vibration welding and ultrasonic welding, etc.
本文主要介绍了热塑性复合材料的若干种焊接方法，如热板焊、红外焊、应焊、动焊、声波焊等。
5.
The Research on the Technology of Ultra-narrow Gap Welding with the Flux Strips Constricting Arc;
焊剂带约束电弧超窄间隙焊接方法研究
6.
Fundamental Study on Hybrid Laser Beam-Resistance Seam Welding(LB-RSW)
“激光束—电阻缝焊”复合焊接方法基础研究
7.
Effect of Welding Methods on Microstructure and Low-temperature Impact Toughness of Welded Joint of 9Ni Steel
焊接方法对9Ni钢焊接接头组织及低温韧性的影响
8.
Influence about Weld Joint Property and Destruction of Aluminium Lithium Alloy by Argon Arc Welding Method
氩弧焊接方法对铝锂合金焊接接头性能和破坏的影响
9.
The varied weld penetration depths of austenic stainless steel in A-TIG welding are studied.
采用活性化焊剂TIG焊接方法研究了奥氏体不锈钢焊缝熔深的变化.
10.
Research on Medium and Thick Plate of High Strength Steel with Stud Welding Technology;
中厚高强钢与螺柱焊接方法试验研究
11.
The current cycle control of AC short circuit transition welding method and system
本周期交流短路过渡焊接方法及系统
12.
For all processes, the Welding Procedure Specification (WPS) shall contain a detailed cleaning procedure indicating joint preparation prior to welding.
对于所有焊接方法，焊接工艺规程都应详细包含清除方法，说明焊前坡口的准备。
13.
What welding methods do you use in connecting the plates, frames, and beams?
在焊接钢板,肋骨，甲板横梁时，你们用什么焊接方法？
14.
Standard for test method of welding splice of reinforced stell bar
钢筋焊接接头试验方法
15.
Chimes shall be mechanically seamed or welded.
桶的凸边必须用机械方法接合，或焊接。
16.
Research for the J_(IC) Test Method of Construct Steel Welded Joint;
结构钢焊接接头的J_（IC）测试方法研究
17.
A New Method of Controling Welding Hot Cracking by Welding Based on Electromagnetic Forces;
基于电磁力的焊接热裂纹随焊控制新方法
18.
Inspecting methods of porosity welded joints in TIG welding
钨极氩弧焊焊接气孔产生原因查找方法