1.
Microstructure Evolution of Low-Carbon Si-Mn TRIP Steel During Step Cooling
TRIP钢在分段冷却过程中的相变行为
2.
Influence of Subsection Cooling Process on Mechanical Properties of Low Carbon Medium Plate
分段冷却工艺对低碳钢中板力学性能的影响
3.
Application of Roll Stepped Cooling Technology for Sheet Shape Control in Angang 1 450 mm Continuous Cold Roliing Mills
轧辊分段冷却技术在鞍钢1450板形控制中的应用
4.
Magnetic Field Analysis and Electromagnetic Force Calculation of a New-type Segments Spray Cooling Electromagnetic Valve;
一种新型分段冷却电磁阀的磁场分析和吸力计算
5.
taking-down period
(玻璃液)冷却阶段
6.
Analysis and design of the fluid state of the section of duct pervasion in the mechanical ventilation cooling tower
机械通风冷却塔风筒扩散段的流态分析与设计
7.
Cooling between stages is necessary.
各段之间需要冷却。
8.
After passing through the regeneration section, the partially cooled liquid product moves on to the sixth and final major component of the system for final cooling.
经过回流段以后,没完全冷却的产品流向第六个设备,也是最后的主要组成部分进行最终冷却。
9.
The reason analysis and treatment method of lower cooling efficiency in cooling tower
冷却塔冷却效率低的原因分析及处理
10.
"The furnace is equipped with a high efficiency compact spray cooling device with high cooling capacity, high cooling rate and good uniformity, by which the length of the cooling zone is reduced. "
采用高效紧凑式喷射冷却装置,冷却能力大,速度快,冷却均匀,大大缩短了冷却段的长度
11.
Nonlinear Behavior of Steel Structures Considering the Cooling Phase of A Fire
火灾后冷却阶段钢结构的非线性性能
12.
a device for cooling and dispensing drinking water.
冷却、分发饮用水的装置。
13.
The cooling water system of Main, auxiliary engine are all closed-type cooling, their cooling water piping are arranged separately.
主、柴油机的冷却水系统均为闭式冷却，其冷却水管分别设置。
14.
The annealed strip is cooled to the temperature required by galvanizing process in the cooling zone and then goes into zinc pot through sealed channel.
将退火带钢在冷却段冷却到指定温度,经密封通道进入锌锅。
15.
The newly developed cooling system has a high efficient two stage radiator.
最新被开发的冷却系统拥有高效率的两阶段冷却。
16.
Cooling System Simulation Analysis of Transient Heat Transfer and Cooling Performance Calculation;
冷却系统瞬态换热仿真分析与冷却性能计算
17.
The Analysis on Control Strategy of Cooling Rate for Plate Accelerated Cooling
中厚板轧后冷却冷速控制策略的分析
18.
Investigation in Corrosion of Condensate Cooler and the Countermeasures
冷凝冷却器腐蚀原因分析及防腐对策