1.
The singular integral equation for the unkown crack opening displacement is derived.
求出了以裂纹张开位移为未知量的奇异积分方程。
2.
Test method for crack-tip opening displacement measurement of metallic materials
GB/T2358-1994金属材料裂纹尖端张开位移试验方法
3.
Estimation of Stress Intensity Factor Solutions for Cracks in Tubular Joints Based on Crack Opening Displacement;
基于张开位移的管节点裂纹应力强度因子评估
4.
Prediction of Crack Tip Opening Displacement(CTOD)from the Instrumented Impact Test Based on the Local Approach
基于局部法由示波冲击试验预测裂纹尖端张开位移
5.
Relationship between stress distribution along slant crack and opening displacement on crack-surface
倾斜裂纹的应力分布与裂纹面开口位移的关系
6.
Opening and sliding displacement behavior of a slant angle fatigue crack under mixed-mode conditions
倾斜疲劳裂纹在混合型应力下张开及滑移特性
7.
In this paper, a simple formula is derived for calculating the dynamic stress intensity factor (DSIF)of three point bending specimen using dynamic crack opening displacement (DCOD).
给出了一种由裂纹的动态张开位移计算三点弯曲试样的动态应力强度因子的简单方法。
8.
AN EXPERIMENTAL STUDY OF OUT-PLANE DISPLACEMENTFIELD NEAR THE TIP OF A THROUGH CRACKIN A PLATE UNDER BENDING
含穿透裂纹平板受弯时裂纹尖端离面位移场的实验研究
9.
Study on the Crack Opening Area of Leak-Before-Break Assessment Procedure for the Welded Pipeline;
焊接管道“先漏后断”评定裂纹张开面积研究
10.
NUMERICAL SIMULATION AND SIMPLIFIED CRITERION FOR CLOSURE OF AN OPEN CRACK IN BRITTLE MATERIALS
张开裂纹闭合的数值模拟及简化判据研究
11.
Propagation and Environmental Propagation of the Indentation Crack of Ferroelectric Materials;
铁电材料压痕裂纹的开裂与环境开裂
12.
At zero applied load, the crack is closed along the perimeter of the specimen but open in the center.
在施加零载荷处，试样周边的裂纹是闭合的，而中心则是张开的。
13.
The opening displacement V is equal to the thickness contraction W.
张开位移V等于厚度的收缩量W。
14.
The Finite Element Method by Using the Singular Element with Concordant Displacement at the Crack Tip
在裂纹尖端引入位移协调奇异单元的有限单元法
15.
Scattering of Elastic Waves Caused by an Interface Crack in a Layered Half Space. Far Field Surface Displacement in the Layer
加层半空间交界裂纹的弹性波散射—弹性层表面位移的远场研究
16.
Exact Solution of Stress and Displacement at Crack Tip for Mode Ⅰ、Ⅱ of Infinite plate
无限大平板Ⅰ、Ⅱ型裂纹尖端应力场及位移场的精确解
17.
initiation of stable crack growth
稳态裂纹扩展的开始
18.
On Influence of Welded Joint on Fracture Parameter with Crack in Different Location
裂纹位置对焊接接头断裂参量的影响