1.
Study on Plasma Surface Chromizing of TiAl Alloy and Its Effects on Oxidation Resistance;
TiAl合金等离子表面渗Cr及抗高温氧化性能的研究
2.
Study on Preparation of Surface Ni-Cr Permeation Layer of Milling Roller Teeth by Plasma Arc
磨辊辊齿等离子弧Ni-Cr共渗研究
3.
Relevance of COD_(Cr) and TOC in Landfill Leachate
垃圾渗滤液中TOC和COD_(Cr)的相关性
4.
Research on Double Glow Plasma Molybdenizing/Chromizing on Ti_2AlNb Orthorhombic Alloy and Their Properties;
Ti_2AlNb O相合金双辉等离子渗Mo、Cr及其性能研究
5.
Preparation of Al-Cr-O tritium barrier by double glow plasma technology
双层辉光离子渗金属技术制备Al-Cr-O阻氚渗透涂层
6.
Research on Cr-Mo Surface Wear Resistant LD Steel by Double Glow Plasma Surface Metallurgy Technology;
双层辉光离子Cr-Mo共渗形成高耐磨LD冷作模具钢的研究
7.
Study on Microstructure and Wear Resistance of Cr-Mo Surface Modified Layer on Ti6Al4V by Double-Glow Plasma Technique
Ti6Al4V合金渗镀Cr-Mo表面改性层组织结构及其耐磨特性研究
8.
Microstructures of Si-Cr co-depositing coatings prepared on Ti-Nb-Si based ultrahigh temperature alloy
Ti-Nb-Si基超高温合金Si-Cr共渗抗氧化涂层的显微组织
9.
Study on effects of Cr~(3+),alkali and surfactant on polymer molecular configuration and seepage flow characteristics
Cr~(3+)、碱和表面活性剂对聚合物分子构型及渗流特性影响
10.
Study on factors of removal of COD_(cr) from old landfill leachate by fenton reagent
影响Fenton法处理晚期垃圾渗滤液COD_(cr)去除因素的研究
11.
Separation and Determination of Cr(Ⅲ)and Cr(Ⅵ);
Cr（Ⅲ）和Cr（Ⅵ）的分离与检测
12.
Analysis of Elements and Determination of Cr(Ⅲ) and Cr(Ⅵ) in Chinese Ink;
中国墨汁元素分析及Cr（Ⅲ）和Cr（Ⅵ）测定
13.
Fabrication and characterization of 30.4 nm Cr/Al/Cr self-supporting filters
30.4nm Cr/Al/Cr自支撑滤光片的研制
14.
testing methods for synthetic rubber cr
合成橡胶cr试验方法
15.
Snoek Relaxational Peak in a Fe-Cr-Al Alloy;
Fe-Cr-Al合金中的Snoek弛豫
16.
Cr-α-Al_2O_3 Composite Electrodeposition Technology
Cr-α-Al_2O_3复合电沉积工艺
17.
The Application of Worklist in KONICA Computed Radiography System
Worklist在KONICA CR系统中的应用
18.
Simultaneous Determination of Cr (Ⅲ) and Cr (Ⅵ) by Spectrophotometry;
分光光度法同时测定水样中Cr（Ⅲ）和Cr（Ⅵ）的含量