说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 句库 -> 镀层缺陷
1.
Coating default on hot-dip galvannealed sheet for automobile and its preventive measures
汽车用合金化热镀锌板镀层缺陷及其防止措施
2.
Coating surface defect on hot-dip galvanized steel sheet and its preventive measures
热镀锌板镀层表面缺陷及其消除措施
3.
Analysis and Improvement of Dross Pick-up in Hot Dip Strip Coating
热镀锌带钢镀层锌渣缺陷形成分析及改进技术
4.
Edge Detecting For Micr.oscope Image Defects of Vacuum Coating Film
真空镀膜膜层缺陷显微图像的边缘检测
5.
Study on Auto-detect System for Detecting Defects of Workpieces' Electroplated Surface;
金属镀层工件表面缺陷自动检测系统的研究
6.
Reasons and Preventive Measures for Pock Flaws on Coating Surface of Galvanized Steel Sheet
热镀锌钢板镀层表面麻点缺陷的产生原因及预防措施
7.
The effect of hydrogen on the ductility of electroless copper deposit is primarily caused by molecular hydrogen contained in voids, particularly the typeⅢ GB voids.
镀层延展性降低的主要原因是由氢气泡的缺陷效应,特别是第三类氢气泡、粒边界气泡空穴。
8.
The Defects of 3PE Coating by Multi-analysis (4): Material Defects
全面分析管道三层PE防腐层缺陷(四):原材料缺陷
9.
The Flaw of 3PE Coating by Multi-analysis (1): the Coating Warping Flaw End of Steel Pipe
全面分析管道三层PE防腐层缺陷(一):翘边缺陷
10.
Analysis and Melioration of Cold-rolled Galvanized Strip Thread Heave
冷轧镀锌板表面线状凸起缺陷分析与改善措施
11.
OBSERVATION AND ANALYSIS OF SURFACE DISFIGUREMENT OF SOLAR CONTROL COATED GLASS
阳光控制镀膜玻璃表面缺陷的观察与分析
12.
Wire beam electrode technique for investigating galvanic corrosion behavior of hot-dip galvanized steel-scratch defect
热镀锌钢材的电偶腐蚀行为-划痕型缺陷
13.
Affect of Continuous Casting Process on Cold Rolling and Galvanized Sheet Surface Defect
连铸工艺对冷轧镀锌板表面缺陷的影响
14.
The Study on Defect Modes of 1-D Photonic Crystal Doped by One Impure Layer;
掺杂一层缺陷的一维光子晶体缺陷模的研究
15.
The Flaw of 3PE Coating by Multi-analysis (2): the Flaw of Weld Coating
全面分析管道三层PE防腐层缺陷(二):焊缝防腐层缺陷
16.
The Defects of 3PE Coating by Multi-Analysis (3): Apparent Defects
全面分析管道三层PE防腐层缺陷(三):表观质量缺陷
17.
RESEARCH ABOUT SCRATCH ON SURFACE OF STRIP STEEL
连续热镀锌沉没辊不转导致带钢划伤缺陷的研究
18.
Think deeply in basic quality defect and countermeasure of the police at the basic level
基层民警的基本素质缺陷及对策思考