1.
Fatigue Properties of Martensitic Stainless Steels with Ultra-low Carbon and High Cleanliness;
纯净超低碳马氏体不锈钢材料的疲劳性能研究
2.
Influence of Copper on Antibacterial Property and Mechanical Property of Low-carbon Martensite Stainless Steel
铜对低碳马氏体不锈钢抗菌性和力学性能的影响
3.
Influence of Copper on Microstructure and Properties of Low Carbon Martensite Antibacterial Stainless Steel;
铜含量对低碳马氏体抗菌不锈钢组织和性能的影响
4.
Brightening Treatment of Austenite Stainless Steel after Plasma Carburizing
奥氏体不锈钢低温离子渗碳后的亮化处理
5.
Corrosion Behavior of Plasma Carburfzed Coating on Austenite Stainless Steel
奥氏体不锈钢离子渗碳后的腐蚀行为
6.
Study on Brightening Treatment of Austenitic Stainless Steel after Low Temperature Plasma Carburizing
低温离子渗碳奥氏体不锈钢表面亮化处理的研究
7.
Study on Equipment and Process of Plasma Carburizing Surface Hardening of Austenitic Stainless Steel at Low Temperature
奥氏体不锈钢低温离子渗碳表面硬化处理设备及工艺研究
8.
Research Progress and Applied Prospect of Low Temperature Carburiding for Austenite Stainless Steels
奥氏体不锈钢低温渗碳技术的研究现状及应用前景
9.
Research for the Mechanism of Microalloyed Carbonitride for the Martensitic Stainless Steel Hard-facing Flux-cored Wire Deposited Metal;
马氏体不锈钢硬面药芯焊丝堆焊层金属碳氮微合金化研究
10.
Strain Hardening of Cryogenic Vessels from Austenitic Stainless Steels;
应变强化奥氏体不锈钢低温容器研究
11.
Study on Mold Fluxes for Cr13 Martensitic Stainless Steel Billet;
Cr13马氏体不锈钢方坯保护渣的研究
12.
Research on Hot Deformation Process of 403Nb Heat-resistant Martensitic Stainless Steel
403Nb马氏体耐热不锈钢热加工工艺研究
13.
The Study on the Solid Solution Nitriding of the Austenitic Stainless Steel and Its Bonding with Carbon Steel;
奥氏体不锈钢固溶渗氮及与碳钢复合的研究
14.
Analysis of Disqualification of Low Carbon Bainite High-strength Steel in Ultrasonic Inspection
低碳贝氏体高强钢探伤不合原因分析
15.
Krupp austenitic steel
克虏伯奥氏体不锈钢
16.
Boronizing of ZG1Cr18Ni9 austenite stainless steel
ZG1Cr18Ni9奥氏体不锈钢的渗硼
17.
Decreasing Chromium Precipitation in Austenitic Stainless Steel during the Ionitriding Process
降低奥氏体不锈钢离子氮化过程中铬的沉积
18.
The Effects of Heat Treatment on Properties of High-Cu Martensite Stainless Steel;
热处理工艺对高铜马氏体不锈钢性能的影响