1.
Application and Study on Operation Optimum and Intelligent Control of the Copper Refining Anode Furnace;
铜精炼炉操作优化与智能控制应用研究
2.
Study on Selective Leaching Cobalt from Copper Smelter Slag at Atmospheric Pressure
从铜精炼炉渣中常压选择性浸出钴的研究
3.
Practice of Copper Refining with Shaft Furnace-Reverberatory Furnace
竖炉——反射炉联合铜精炼工艺实践
4.
Process Practice of Combined Copper Refining with Shaft Furnace-reverberatory Furnace(Cound.)
竖炉—反射炉联合铜精炼工艺实践(续)
5.
Production practice of reduce the copper content of refining slag in scrap copper reverberatory furnace
降低废杂铜反射炉精炼渣含铜的生产实践
6.
Study on Optimal Heavy Oil Flux and Its Monitoring and Control System of an Anode Furnace for Copper Refining;
铜精炼阳极炉最优重油流量及其监控系统研究
7.
blister and refined unwrought copper
粗炼的和精炼的未锻铜
8.
Mathematical Model of LPG Flux About Rotary Anode Furnace in Copper Refining Based on Preheated Oxygen-rich Air
富氧空气预热下铜精炼阳极炉液化气流量数学模型
9.
Practice of improving 10t refiner magnesium fining reclaiming efficiency
提高10吨精炼炉熔炼外购镁精炼回收率的实践
10.
RAPID MELTING IN ELECTRIC ARC FURNACE AND VACUUM REFINING OF SPECIAL STEELS
特殊钢的电弧炉快速冶炼和真空精炼
11.
The Numerical Analysis and Optimization on Process in Copper Flash Furnace;
炼铜闪速炉熔炼过程的数值分析与优化
12.
The Production Practices of the Ausmelt Copper Smelting Furnace Gas Manufacturing of Sulfuric Acid
奥斯麦特铜冶炼炉烟气制酸生产实践
13.
Tests on Copper Separation in Flotation from Copper Slags of a Smelting Plant
从某冶炼厂水淬铜炉渣浮选回收铜的试验研究
14.
Experimental Study on Foaming Slag for Steel Refining and Physical and Mathematical Simulation of LF Process;
LF泡沫精炼渣研究及钢包精炼炉数理模拟
15.
Equipment Design of No.2 LF Refining Furnace in Shougang No.2 Steel-making Plant
首钢第二炼钢厂2号LF炉精炼设备设计
16.
operation of poling
(铜火法精炼还原阶段的)插树
17.
STUDY OF THE COPPER ELECTROREFINING FEASIBILITY BY AC/DC ELECTROLYSIS
交直流叠加电解精炼铜的可行性研究
18.
DESIGN OF SYSTEM FOR TREATING SMOKE DUST DURING SMELTING WASTE COPPER
废铜熔化精炼过程烟尘治理系统设计