1.
Manufacturing of 7075 Aluminum Alloy Axle Body of Hollow Transmission Shaft by Squeezing Casting
7075铝合金传动轴空心轴身的挤压铸造工艺研究
2.
Increase Grinding Effi ciency during Processing the Hollow Shaft of Shearer Motors
提高采煤机电机空心轴磨削加工效率
3.
Driving power for the cutting tool comes from the rotation of the spindle, which is a hollow shaft that rotates in bearings.
刀具的驱动力来自主轴的旋转，主轴则是一根在轴承中旋转的空心轴。
4.
Theoretic and Experimental Research on Three-Roll Cross Wedge Rolling of Non-Quenched and Tempered Steel Hollow Shafts
非调质钢空心轴三辊楔横轧理论与试验研究
5.
Using elastic wrench moment axle in the hollow axle of motor is a good way of setting elastic buffer device of transmission system.
在截割电机空心轴内使用弹性扭矩轴是设置传动系统弹性缓冲的好办法。
6.
Check that the hollow shaft and its seal are proper and that the packing gland should not compress too tightly on the packing set and the drip leakage is allowed.
检查空心轴和轴密封程度是否适当，填料压盖不可将盘根压得过紧，允许呈滴状渗出。
7.
hollow core coaxial Ge Li detector
空心同轴锗锂探测器
8.
Study on Operation Performance of Axial-radial Air Compressor;
轴流—离心组合式空压机运行性能研究
9.
Analysis of Vertical Bearing Capacity of Concrete-Filled Double Skin Steel Tube Columns
中空夹层钢管混凝土的轴心受压研究
10.
Investigation of Large Titanium Alloy Thrust Hollow Ball Bearing
大型钛合金空心推力球轴承特性研究
11.
The New Measures of Reducing Vibration of Shaft in DH Type Centrifugal Air Compressor
减小DH型离心空压机轴振动的新措施
12.
Finite Element Analysis about the Hollow Enter Shaft in the Accelerator of Wind Generator
风电增速箱空心输入轴的有限元分析
13.
RESEARCH OF THE FATIGUE CRACK PROPAGATION CHARACTERISTIC ON RAILWAY HOLLOW AXLES
高速客车空心车轴裂纹扩展特性研究
14.
Analysis of Coupling Failure for 5TYD160 Centrifugal Compressor
5TYD160离心式空压机联轴器故障分析
15.
Finite Element Analysis of Hollow Input Shaft Based on Ansys 10.0
基于ansys10.0的空心输入轴有限元分析
16.
Axis Ostwind Flakpanzer area of effect radius increased.
轴心国东风防空坦克炮弹杀伤范围增加。
17.
The blades at its periphery throw off air centrifugally in a direction following the rotation.
轮周叶片将空气沿着转动方向抛离轴心。
18.
The failure of the hollow cylinder roller bearing is stress corrosion wearing.
空心圆柱滚子轴承为应力腐蚀磨损失效。