1.
Analysis of Axial Velocity With Perspective Affine Transformation
轴向变形系数的透视仿射变换法分析
2.
Introducing The Coefficient of Asle Direction Changed Shape andthe Size of Angle Between Axle and Asle From the Formation of Posi-tive Equal AnoprojEction
从正等轴测图形成过程分析轴向变形系数和轴间角的大小
3.
Neglect the axial deformations and consider only the lumped masses.
略去轴向变形不计，仅考虑集中质量。
4.
Analysing the Effect of Axial Deformation of Column on Flexibility Matrix of a High-Rise Framed Structure
柱轴向变形对高层框架结构柔度矩阵影响分析
5.
Study on Analysis Method and Regulation of Internal Forces of Frame-tube Structures Caused by Axial Deformation Difference;
框架—筒体结构考虑轴向变形差的内力分析方法及规律研究
6.
Building of test system on axial deformation of diamond circular saw blade
金刚石圆锯片轴向变形测试系统的构建与实验研究
7.
Axial load-deformation curve and preload on angular con act ball bearings
角接触球轴承的轴向载荷—变形曲线和预紧
8.
In general, the deformation of the model grille is a combination of axial and shear strains.
一般情况下，模型栅格的变形是轴向应变和切向应变的组合。
9.
On Deformation Laws and CAPP System for Radial-axial Ring Rolling;
环件径轴向轧制变形规律与CAPP系统研究
10.
Study on the Characteristic of Soil Anisotropic Deformation by True Triaxial Test;
土体各向异性变形特性真三轴试验研究
11.
Influence of elastic deformation on lubricating characteristics of port plate pair of axial piston pump
弹性变形对轴向柱塞泵配流副润滑特性的影响
12.
Buckling of compressed bar subjected to combined effect of axial loads considering shear deformation
考虑剪切变形时轴向载荷联合作用下压杆屈曲
13.
Deformation Characteristics of Wires Helix in Single-strand Rope Bearing Axial Load
轴向载荷下单股钢丝绳内部钢丝变形特性
14.
steering worm sector bearing
转向器扇形蜗轮轴承
15.
coaxial variable direction coupler
同轴可变定向耦合器
16.
the shape, run and change trend of shaft center trajectory are consistent to the test result too.
轴心轨迹的形态、走向及变化趋势与实验结果相吻合。
17.
Simulation of polyurethane pre-compressing seal deformation process in high-pressure tube-testing press with finite element method
高压水压试管机轴向预压紧密封变形过程有限元仿真
18.
Analysis of the Surface Shape of the V sheave and the Belt Misalignment in the Metal V Belt CVT
金属带式无级变速器装置带轮工作面形状与带轴向偏移的分析