1.
Study and Design of Fixtures for the Parts with Complicated Shape;
面向复杂形状工件加工的夹具系统的研究与设计
2.
Hot forming process optimization of a complex titanium alloy part with numerical simulation method
复杂形状钛合金热成形零件工艺仿真及参数优化研究
3.
Study on Key Technologies of Reverse Engineering for Complex Object;
复杂形状实体反求工程关键技术研究
4.
Judge and Put Up Edge Layout and One Die Forming for the Complex Shape Stamping Parts
裁搭边排样与复杂形状冲压件的一模成形
5.
Based on "CAXA WEDM XP" Software Parts of Complex Graphics Processing Methods
基于“CAXA线切割XP”软件的复杂图形零件加工方法
6.
Title in EnglishThe Simulation of Complex part cold extrusion and optimizion of process
复杂件冷挤压成形数值分析和工艺优化
7.
Design and Construction of Tower Crane Under Complex Terrain Condition
复杂地形条件下塔式起重机基础设计与施工
8.
Monitor of the Surface Construction (Structure) in Complex Terrain Conditions During the Tunnel Construction
复杂地形条件下隧道施工地表建(构)筑物监测
9.
Research of Automated Ultrasonic Non-Destructive Test of Large Complex Geometry Composite Structures in Aeronautic Industry;
大型航空复杂形状复合构件自动化超声无损检测研究
10.
Based on the reduced scale ring rolling and finite element simulation, materials axial transferring pattern was studied and a formability evaluation method was proposed including the shape factor.
研究了大型复杂环件形状因素和轧制速率对成形性能的影响规律。
11.
Research on Numerical Simulation Modular Organization for Deep Drawing Process of Complex Shape Cover Body;
复杂形状汽车覆盖件成形过程数值仿真模式的研究
12.
Study on Microstructure and Properties of Complicated Shape Disk of FGH95 PM Superalloy
复杂形状FGH95粉末盘形件固溶处理组织及性能研究
13.
Abstract: Reed valve, high-speed and complicated in shape, is one of key parts in microengine.
文摘:高速复杂形状簧片阀是微型发动机关键零件之一。
14.
Reed valve, high-speed and complicated in shape, is one of key parts in microengine.
高速复杂形状簧片阀是微型发动机关键零件之一。
15.
Nonlinear Finite Element Ultimate Analysis of Reinforced Concrete Thin Plates with Complex Geometry & Boundary Condition;
复杂几何形状及边界条件钢筋混凝土薄板非线性有限元极限分析
16.
Research of Complex Vesicles in Spherical Topology;
球形拓扑中复杂形状生物膜泡的研究
17.
Research on Behaviour of Concrete-Filled Steel Tubes Subjected to Complicated Loading States;
钢管混凝土构件在复杂受力状态下的工作机理研究
18.
Study of the Application of Reverse Engineering in Complex Stamping Parts and Die Design;
反求工程在复杂冲压零件及成形模具设计中的应用研究