说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 句库 -> 冲击腐蚀磨损性能
1.
Effect of Cr Content on Impact Corrosion and Abrasion Properties and Mechanisms of Low Carbon Alloy Steel;
铬含量对低碳合金钢冲击腐蚀磨损性能和机理影响的研究
2.
Effect of Mediator and Impact Energy on the Impact Corrosion Abrasion Properties of New Wet Grinding Liner;
新型矿山湿磨机衬板钢在不同介质和冲击功下的冲击腐蚀磨损性能
3.
Effect of Composition on Impact-wear Behavior and Mechanism of Alloy Liner Steels in Corrosive Condition;
成分对合金衬板钢材料腐蚀条件下冲击磨损性能与机理的影响
4.
Research on the Effect of Impact Energy to the Impact Abrasion Properties and Mechanisms of the Wet Mill Liner Materials Used in the Corrosive Condition;
冲击功对湿磨衬板用钢在腐蚀条件下冲击磨损性能与机理影响的研究
5.
Study of Impulsive Corrosive Wear and Tear of Two Kinds of Steel in Hot Strong Alkaline;
热强碱性条件下两种钢冲击腐蚀磨损的研究
6.
The Influence of Impact Energy and Impact Angle on the Impact Corrosion and Abrasion Mechanisms of Steels Used in Wet-grinding Machine Lining Board;
冲击功、冲击角对湿磨衬板钢冲击腐蚀磨损机理影响
7.
Influence of Component and Microstructure on the Impact Corrosion and Wear Properties and Mechanism of Steels;
成分与组织对钢的冲击腐蚀磨损特性与机制的影响及其机理研究
8.
Different Materials Corrosion and Impact Wear Interaction Mechanism in Weak Acid Medium
弱酸性介质中不同材料腐蚀与冲击磨损交互作用机理研究
9.
Mechanism Investigation and Discussion on the Interaction of Corrosion and Impact Wear of Different Materials under Weak Acid Medium Condition
弱酸性介质中不同材料腐蚀与冲击磨损交互作用机理研究和探讨
10.
Research of the Influence of Component、Microstructure and Impact Energy on the Impact Corrosion and Abrasion Mechanisms of Steels Used in Wet-grinding Machine Lining Board;
成分、组织及冲击功对湿磨衬板用钢冲击腐蚀磨损机理影响的研究
11.
Corrosion behaviors of chrome steel during impact and abrasion in simulative mineral slurry
铬钢在模拟矿浆中受冲击磨损时的腐蚀行为
12.
Effect of Impact Power on Corrosive Wear of Medium Carbon Alloy Steel
不同冲击功对中碳合金钢腐蚀磨损的影响
13.
Influence of Component, Microstructure and Impact Energy on the Impact Corrosion and Abrasion Mechanisms of High Manganese Steel Modifidied by Rare-earth(RE);
成分、组织及冲击功对稀土改性高锰钢冲击腐蚀磨损机理影响的研究
14.
Study on Impact Corrosion and Abrasion Mechanism of Low Carbon Alloy Steel for Liner Under Different Impact Energy
不同冲击功下衬板用低碳合金钢冲击腐蚀磨损机理的研究
15.
Solid-Liquid Two-Phase Flow Erosion Wear Properties of Si_3N_4-SiC Composite
Si_3N_4-SiC复相耐磨材料的冲蚀磨损性能
16.
The Development of New Materials and the Behavior of Corrosion-abrasion of the Liner of Wet-grinding Machine in Metallurgical Industry;
湿磨衬板新材质开发及冲击腐蚀磨损机理的研究
17.
Effect of Impact Energy on the Corrosion Wear of High Manganese Steel
湿磨工况下冲击功对高锰钢腐蚀磨损交互作用的影响
18.
Study on Wear and Corrosion Properties of New Type Austenitic Stainless Steel;
新型奥氏体不锈钢磨损、腐蚀性能研究