1.
Measurement of Key Dimensions of Large-size and Thin-wall Pieces Based on Vision Inspection Technology;
大尺寸薄壁零件关键尺寸的视觉检测
2.
The Six-jaw Hydraulic Power Chuck and Clamping Thin-walled Components
六爪液压动力卡盘和薄壁零件的夹持
3.
Stability Prediction for High-speed Milling of Thin Walled Structures and Experimental Validation
薄壁零件高速铣削稳定性预测与验证
4.
Research on the Precise NC Milling Technology of Thin-walled Workpieces
薄壁零件精密数控铣削关键技术研究
5.
Research on Influencing Factors of Chatter in High Speed Milling of Thin-walled Workpiece
薄壁零件高速铣削振动影响因素研究
6.
The Research of Instrument for Measurement of Wall-thickness and Wall-thickness Difference of Thin-wall Parts of Variation Curvature Revolving Body;
变曲率回转体薄壁零件壁厚及壁厚差测量仪的研究
7.
Study on Precision Electroforming Technology of Complex Thin-walled Parts;
精密电铸法制造复杂薄壁零件的工艺研究
8.
Research on Analysing and Controlling Clamping Deformation of Precision Thin-wall Workpiece;
精密薄壁零件装夹变形的分析与控制研究
9.
Research on Cutting Vibration and Machining Technology in Milling Thin-walled Components;
薄壁零件的加工振动分析与加工工艺研究
10.
Research on Deformation in End Milling of Aerospace Thin-walled Structure Part;
航空薄壁零件的铣削加工变形控制研究
11.
Research on Machining Deformation Prediction and Simulation of Thin-Walled Parts
薄壁零件加工变形的预测及其仿真研究
12.
Experimental Study and Finite Element Analysis on Deformation of Side Milling Aluminum Thin Walled Component
铝合金薄壁零件精密加工变形分析及实验研究
13.
Test and Analysis for Dynamic Characteristics of Thin-walled Components Milling System
薄壁零件铣削加工系统动态特性测试与分析
14.
Study on Processing Technology of Thin-walled parts Based on Theory of Stiffness
刚度理论视域下薄壁零件加工工艺研究
15.
Analysis of deformation in viscous medium outer pressure necking for thin-wall parts with variable diameter section
变径薄壁零件粘性介质外压缩径变形分析
16.
Effect of Milling Cutter Parameters on Milling Stability of Thin-Wall Parts
铣刀参数对薄壁零件铣削稳定性的影响
17.
Forming Process Depending on Sheet Blank Flow in the Circumferential Direction for Asymmetrical Thin-Wall Parts with a Variable Diameter
非对称变径薄壁零件材料环向流动成形方法研究
18.
Thin-Walled Part of Variable Wall Thickness Machining Modeling and Its Experimental Study
薄壁变壁厚零件切削加工建模及其实验研究