1.
Discussion on the opening porosity of porous ceramic materials by drainage method
排液法测定多孔陶瓷材料开孔率的探讨
2.
Permeable sintered metal materials--Determination of open porosity
GB/T5164-1985可渗性烧结金属材料--开孔率的测定
3.
Devolatilization and Combustion in FBC and the Distributor with Unequal Vent Area Rate
沸腾炉内挥发份燃烧和变开孔率式布风板
4.
Three-Dimensional FEA of Large Opening Cylinder with Flatting Nozzle;
大开孔率圆柱壳平齐接管结构三维有限元分析
5.
Fabrication of Thick Metal Micromesh Sieves with High Open Area Using the UV-LIGA Process
UV-LIGA技术制备大厚度高开孔率精细金属网板
6.
Research on Biological Aerated Filter Treatment Efficiency for Media Size and Macrospore Aperture;
滤料粒径和曝气管开孔率对曝气生物滤池处理效能影响的研究
7.
Fabrication and Characterization of the Tissue Engineering Scaffolds with High Open Porosity by Supercritical Carbon Dioxide;
超临界CO_2制备高开孔率的组织工程支架材料及性能表征
8.
Simulation Study of Gas-particle Movement Based on Different Opening Rate of Air Distribution Plate in ESP
基于气流分布板不同开孔率的电除尘器内气粒运动模拟研究
9.
The ratio of the diameter of nozzle to the diameter of vessel has greater effect on the distribution area of high stress in plastic deformation stage.
对于均处于塑性阶段的结构而言，开孔率的大小对高应力区的分布范围影响较大。
10.
This distributor use small space. has more distribute hole, little gas resistance, low pressure drop, wide operation flexibility.
该气液分布器空间占位更低，气体通道开孔率更大，气流阻力小，压降低，操作弹性范围大。
11.
Experimental study on desulfurization efficiency in spouted bed with spotting punch draft tube
开孔导流管喷动床脱硫率的实验研究
12.
Cellular plastics-Determination of volume percentage of open and closed cells of rigid materials
GB/T10799-1989硬质泡沫塑料开孔与闭孔体积百分率试验方法
13.
Study on heating efficiency of a porous and passive solar collector
一种开孔被动式太阳能集热器热效率的研究
14.
ANALYSIS OF DEFECT LIMIT AND REINFORCEMENT OF THE OPENINGS ON THE FLANGE PLATE OF STEEL REINFORCED CONCRETE COLUMN
型钢混凝土柱翼缘开孔缺损率限值及补强分析
15.
musculus dilatator pupillae
瞳孔开肌(musculus)
16.
While setting the span and zero, please open the front lid. As the following figure shows.
在进行比率和零点调节时，必须打开前面的活动盖。调节孔如图3。
17.
His tie was an eyesore, but he had a pleasant, open face and an attractive grin.
他的领带鲜艳刺目，面孔却坦率开朗，笑容可掬，招人喜爱。
18.
Study on effective thermal conductivity of open metal foam
开孔金属泡沫有效热导率的理论分析与实验研究