1.
all-weld-metal test specime
全焊缝金属试验样品
2.
Regression and Analysis on Metal Strength of Welding Seam of Welding Core Wine
药芯焊丝焊缝金属强度的回归与分析
3.
Superplastic Behavior of Weld Metal by Friction Stir Welding
搅拌摩擦焊接焊缝金属的超塑性行为
4.
Effect of Nb and V in high carbon steel weld metal
铌和钒在高碳钢质焊缝金属中的行为
5.
Sucking-extruding Theory for the Material Flow in Friction Stir Welds
搅拌摩擦焊焊缝金属塑性流动的抽吸—挤压理论
6.
Failure Analysis and Evaluation of a Low-alloyed Steel and Its Welding Metal;
某低合金钢及焊缝金属失效分析及安全评定
7.
Effects of Process Parameters on Flow Pattern of LY12 Aluminum Alloy during Friction Stir Welding
搅拌摩擦焊工艺参数对LY12铝合金焊缝金属流动形态的影响
8.
Effect of Aluminum on Microstructure and Property of Calorizing Steel Weld Metal
铝对渗铝钢焊缝金属组织与性能的影响
9.
J-Integral Test and Residual Strength Analysis for Steel 907A and Its Weld;
907A钢及焊缝金属的J积分测试与剩余强度分析
10.
Detection and Analysis of Phase Transformation Process on Weld Metal of 10CrMo910 Steel
10CrMo910钢焊缝金属相变过程的实时检测及分析
11.
Fracture toughness of heat-affected zone( HAZ) was between the base metal and weld metal.
焊接热影响区的断裂韧性介于母材和焊缝金属之间。
12.
Difference of impact absorbed energy between butt weld metal and deposited metal
对接焊缝金属和熔敷金属冲击吸收功差异的探讨
13.
EFFECT OF NICKEL ON SOLIDIFICATION CRACKING IN LOW C LOW ALLOY STEEL WELD METAL
镍对低碳低合金钢焊缝金属凝固裂纹敏感性的影响
14.
Study on the Acicular Ferrite Formation Mechanism of Weld Metal in Microalloyed Steel;
微合金钢焊缝金属中针状铁素体形成机理的研究
15.
Addition of activating agent has no obvious effect on fracture toughness of weld metal.
添加活性剂对焊缝金属的断裂韧性没有明显作用。
16.
The deposited ferritic weld metal shall not contact the austenitic or high-chromium steel cladding.
熔敷的铁素体焊缝金属不应与奥氏体或高铬钢复层接触。
17.
EFFECTS OF HEAT TREATMENT ON THE MICROSTRUCTURE AND MECHANICAL PROPERTY OF WELD METAL WITH Nb ADDITION
热处理工艺对含Nb焊缝金属组织与力学性能的影响
18.
Transfer Behavior Study in Weld Thickness Direction of the Welding Plastic Metal in Friction Stir Welding
搅拌摩擦焊焊缝塑性金属在焊缝厚度方向的迁移行为研究