1.
Effect of Welding Angle on Fatigue Performance of Welded Structure
焊接角度对焊接结构疲劳性能的影响
2.
Study of Length Calculation of Three Side Welded Lap;
三面围焊搭接角焊缝长度计算的探讨
3.
Application of Angle Sensor in All-position Automatic Welding Systems
角度传感器在全位置自动焊接系统中的应用
4.
Research on Welding Gradient Optimization Process of 80kg Heavy Gauge Steel Plate in Hydraulic Support
液压支架用80kg级高强钢焊接坡口角度优化研究
5.
Supervisory Analysis on Nondestructive Inspection of Welding Bond for UHV HGIS Enclosure
从监造角度分析特高压HGIS壳体焊接接头的无损探伤检测
6.
Hexagon weld nuts
GB/T13681-1992焊接六角螺母
7.
Quality Control of the Fillet Weld in the Tube and Tube Sheet of Heat Exchanger
换热器管-管板角焊缝焊接质量的控制
8.
The Strength and Loading Capacity of SSAW Pipe Welding Joint
螺旋焊管焊接接头的强度和承载能力
9.
Indicates a weld in a flanged corner groove. Lines will elongate when height is increased.
指示在法兰转角沟中焊接。线可随着深度的增加而拉长。
10.
Research on the Key Technology of Industrialization of Capacitive Displacement Sensor Based Instrument for Measuring Welded Joint Angularity and Stagger Joint;
容栅式数显焊接棱角度错边量检测仪产业化关键技术研究
11.
Parameters optimization of fillet weld sealing joint in high pressure hydrogenation heat exchange
加氢换热器角焊缝密封接头焊接工艺参数优化
12.
The welding quality is directly influenced by the speed control of welding dolly in the automation welding system.
焊接自动化系统中的焊接小车的速度控制直接影响焊接质量。
13.
Automatic submerged arc welding is the method for medium/ thick plate welding, but it mainly to be used in flat welding and fillet welding.
埋弧自动焊是焊接中厚板常用的焊接方法,但常规用在平、角焊位置的焊接。
14.
Study on Influence of Welding Process Parameters on Strength of Welded Joint
焊接工艺参数对焊接接头强度的影响研究
15.
Affect of Different Solder on Intension of Cu/W Brazing Joint
不同焊料对Cu/W钎焊接头强度的影响
16.
The influence of SMT reflow soldering temperature curve on the welding quality
SMT再流焊温度曲线对焊接质量的影响
17.
What Does the Quality Welding Have to Do Wifh the Width and Height of Pipeline Manual Arc Welding
管道手工电弧焊焊接宽度、高度与焊接质量的关系
18.
Application of ultrasonic sensor in automatical welding of right-angle welding seam
超声波传感器在直角焊缝自动焊接中的应用