1.
Al-Si foam was fabricated by direct melt foaming.
采用熔体发泡法制备泡沫铝硅合金。
2.
The Wettability Behaviors Research between Al-Ge Alloy and Vesicant of Aluminum Foams
铝锗合金对泡沫铝发泡剂的润湿性研究
3.
Metallurgy Bonding of Closed-cell Aluminum Foam with Aluminum and Aluminum Alloy Plate
闭孔泡沫铝与铝及铝合金覆板的冶金结合
4.
Analysis on the Condition of Molding and Characteristic Parameter of Foamed Aluminum Mould;
泡沫铝模具成型条件及表征参数分析
5.
Technic Rsearch on Foam Aluminum by Coating AlPO_4/TiH_2;
泡沫铝用AlPO_4/TiH_2包覆工艺研究
6.
Application of Aluminum Foam Board in the Lathe Acoustical Enclusure;
泡沫铝板在机床隔声罩中的应用研究
7.
EFFECT OF ALLOYING ON COMPRESSIVE MECHANICAL PROPERTIES OF THE ALUMINUM ALLOY FOAMS;
合金化对泡沫铝压缩力学性能的影响
8.
Fabrication and Compressive Properties of Al foam With Fine Cell Structure
小孔径泡沫铝的制备及压缩性能研究
9.
Study on Preparation of New Type Coated TiH_2 in Aluminum Production;
泡沫铝用新型复合包覆TiH_2发泡剂的制备研究
10.
Preparation by the Means of MFT and Investigation of the Properties of Aluminum Alloy Foam;
泡沫铝的熔体发泡法制备及其性能研究
11.
Foaming Behavior and Compression Property of Al-alloy Foams
泡沫铝合金发泡特性及压缩性能的研究
12.
Numerical simulation of predict bubble generation diameter of aluminum foam
泡沫铝制备过程气泡生成尺寸的数值模拟研究
13.
Preparation and Analysis on the Defects of Aluminum foams via Melt-foaming method
熔体发泡法制备泡沫铝合金及其缺陷分析
14.
Numerical simulation of production processes of aluminum foams using air injection and melt stir
熔体吹气发泡法制备泡沫铝的准三维数值模拟
15.
Preparation and properties of Ni-coated TiH_2 foaming agent used in foamed aluminum production
泡沫铝用Ni/TiH_2包覆型发泡剂的制备工艺及性能
16.
Preparation of aluminum foam by composite-carbonate foaming agent
复合碳酸盐作发泡剂制备泡沫铝的工艺研究
17.
Preparation of Aluminum Foam Sandwich Perform by Roll-bonding Process
轧制复合法制备泡沫铝夹心板发泡预制坯
18.
Powder Metallurgy-Foaming Process of Rolled Precursor for Aluminum Foam Sandwich
泡沫铝夹心板轧制预制坯的粉末冶金发泡工艺