说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 句库 -> 材料流动
1.
Study on Fluidity Property of Modified Fly Ash Filled SBS Composites
改性粉煤灰填充SBS复合材料流动性能研究
2.
Finite element simulation of material flow and section formation in sheet metal blanking
板料冲裁过程中材料流动与断面形成的有限元模拟
3.
Numerical Simulation of Flow-Induced Corrosion of Metals in High Flow Multiphase Seawater and Test Verification;
高速多相海水中材料流动腐蚀的数值模拟与实验验证
4.
Electrorheological Material and Its Application in Vibration Control
电流变材料及其在振动控制中的应用
5.
Flowing Behavior of Liquids Through Fracture Surfaces of Cement-based Materials
水泥基材料单一裂缝表面流体流动规律研究
6.
The pivotal factor of predicting rolling force is flow stress.
影响轧制力的主要因素是材料的流动应力。
7.
Studied on Active Thermal Flow Controller Based on Composite Materials;
基于复合材料的主动热流控制器的研究
8.
The Analysis of Dispersion Characteristics and Input Power Flow of Composite Euler Beam;
复合材料欧拉梁频散特性及振动功率流分析
9.
The Experimental Analysis of The True Yield Point of Metal s Bend and Tuist;
金属材料弯曲和扭转真实流动极限的实验研究
10.
The Materials Self-healing Principle Experiment and Flow Characteristics Investigation
材料损伤自修复过程原理实验与流动特性研究
11.
Determination of dilatancy angle for geomaterials under non-associated flow rule
岩土材料在非关联流动法则下剪胀角选取探讨
12.
Study of the LLDPE/POE/CB Semiconductive Composites with High Flowablity
具有高流动性的LLDPE/POE/CB半导电复合材料的研究
13.
Dynamic Rheological Properties of MC Nylon 6/Kevlar Fiber Composites
MC尼龙6/Kevlar纤维复合材料的动态流变性能
14.
Analysis on Hydrodynamics and Material Removal Rate of Circular Translational CMP;
圆平动化学机械抛光的流体动力性能及材料去除率研究
15.
Plant layouts shall optimize material travel, handling and value-added use of floor space, and shall facilitate synchronous material flow.
工厂的布局应使材料转移搬运和对场地空间的增值使用达到最优,有利于材料的同步流动。
16.
Study on the Electrical Properties and Dynamic Rheology Behaviors of MWNTs/HDPE Composites
碳纳米管/高密度聚乙烯复合材料的导电性和动态流变行为研究
17.
An Experimental Study of Microencapsulated Phase Change Material Suspension Flow and Heat Transfer in Rectangular Minichannels;
相变材料微胶囊悬浮液在矩形小通道内流动传热的实验研究
18.
Theoretical and Experimental Study on Polymer Melt Flow Within the Die in Plastic Profile Gas-assisted Extrusion;
塑料异型材气辅挤出口模流动的理论与实验研究