1.
Study on Mold Cavity Parting Technology based on Pro/E
基于Pro/E模具型腔分型技术的研究
2.
Research on KBE Based Cavity Design System for Injection Mold;
基于KBE的注塑模具型腔设计系统研究
3.
Study of the NURBS Describing Method on the Mold Cavity of the Molding Tool;
模具型腔的NURBS几何描述方法的研究
4.
Magnetic grinding method applied in complex cavity finishing
磁研磨法应用于模具型腔的光整加工
5.
The mold cavity was obtained by splitting mold base in parting surface.
模具型腔可采用分型面分割模板的方法获取。
6.
Surface roughness model and cutting parameters control in mold cavity finishing
模具型腔精加工粗糙度预测模型与加工量优化
7.
Fabrication of microchannel cavity using a modified UV-LIGA process
UV-LIGA技术在微型模具型腔加工中的应用研究
8.
Research on Toolpath Planning for Mould Cavity with Islands Machining;
在具有孤岛的模具型腔加工中刀具轨迹规划的研究
9.
Cavity surface construction of tyre tread pattern mold and its finish machining
轮胎花纹块模具型腔曲面构造及数控加工
10.
A STUDY METHOD ON PLASTIC DEFORMATION OF SURFACE LAYER OF DIE CAVITY
一种研究热锻模具型腔表层塑性变形的方法
11.
Study on High Efficiency NC Machining Strategies and Parameter Optimization Oriented to Mould Cavity Machining
模具型腔高效数控加工策略及参数优化研究
12.
Optimation Technology on NC Machining Cutting Parameters and Strtegies Oriented to Mould Cavity;
塑料模具型腔数控加工参数和策略的优化技术
13.
Research on the Cavity Mould NC Machining Strategy in Cimatron~(it)
Cimatron~(it)软件在模具型腔加工中的加工策略研究
14.
Electrochemical mechanical finishing technique for mould cavity surface
模具型腔表面电化学机械光整加工技术
15.
Research on Feedrate Optimization for Mould Cavity Machining Based on Instantaneous Milling Force Model;
基于瞬时铣削力模型的模具型腔数控加工进给速度优化研究
16.
Design Method of Injection Mold Cavity Based on Numerical Analysis and Reverse Deformation;
基于数值模拟及反向变形的注塑模具型腔设计方法
17.
Study on establishing the mold cavity with technology of automatic parting surface based on Pro/E
基于Pro/E利用自动分型面技术创建模具型腔研究
18.
On the basis of analysis of the existing die failure induced by deformation, with the aid of FEM analysis, a typical deformation of die surface was studied.
以实际变形失效的模具为基础,借助有限元分析,研究了典型模具型腔壁面上的变形情况。