1.
Effects of Brazing Temperature on Vacuum Joint Microstructure and Microhardness of Inconel Superalloy
钎焊温度对镍基合金真空钎焊接头组织及硬度的影响
2.
Study on Microstructure and Mechanical Properties of C/C Composite and TC4 Brazed Joint;
C/C复合材料与TC4钎焊接头组织及性能研究
3.
Microstructures of Si/SiC Ceramic and Invar Alloy Brazing Joint
Si/SiC复相陶瓷与殷钢钎焊接头组织结构研究
4.
Effect of soldering parameters on the soldered joint microstructure performance of the down quenching SnAgCu solder alloy
工艺参数对急冷型SnAgCu系钎料合金钎焊接头组织性能的影响
5.
Microstructure and properties of dissimilar metals TIG welding-brazing joint of aluminum alloy to stainless steel using Al-Si flux-cored wire
铝合金与不锈钢异种金属铝硅药芯焊丝TIG熔钎焊接头组织及性能
6.
Effect of phosphorus content on microstructure and shear strength of Sn-2.5Ag-2.0Ni/ Ni(P) solder joint
磷含量对Sn-2.5Ag-2.0Ni/Ni(P)钎焊接头组织及剪切强度的影响
7.
Microstructure and Mechanical Property of Joint by Amorphous Fillers
非晶镍基钎料钎焊接头性能及微观组织的研究
8.
Microstructure of Soldering Joint of Rapidly Solidified Sn2.5Ag0.7Cu Solder Alloy
快速凝固态Sn2.5Ag0.7Cu钎料钎焊接头的显微组织
9.
Structure of brazed joints of TA2/BT20 with Ag-28Cu filler metal
Ag-28Cu钎焊TA2/BT20接头组织分析
10.
Microstructure and Properties of Vacuum Brazing C_f/C Composites Using Reactive Al Based Filler Metals
铝基活性钎料真空钎焊C_f/C复合材料焊接接头的组织及性能
11.
Interface structure and strength analysis of brazed GH3044 nickel-based alloy joint
GH3044镍基合金钎焊接头的界面组织和强度分析
12.
Microstructure and Residual Mechanical Property of Thermomechanically-Fatigued Composite Solder Joints;
复合钎料钎焊接头热疲劳显微组织与残余力学性能研究
13.
The Microstructure and Properities of the Joint of Si_3N_4 Ceramics by Au-Ni-V Brazing Alloy;
Au-Ni-V钎料钎焊氮化硅陶瓷接头的组织及性能研究
14.
Microstructure and Performance of Sn-9Zn Based Lead Free Solder/Cu Solder Joint and Their Interface Region
Sn-9Zn基无铅钎料/Cu钎焊接头及界面区组织性能的研究
15.
Microstructure and mechanical properties of magnesium alloy AZ31B joint brazed with Al-Mg-Zn filler metal
Al-Mg-Zn钎料钎焊镁合金AZ31B接头的显微组织和性能
16.
Weldability and Microstructure of Copper Joints Welded by Two Kinds of Phosphor-copper Brazing Filler Metal
两种铜磷钎料对紫铜钎焊的焊接性能和焊缝组织对比
17.
Laser Welding-Brazing Process and Microstructure Property of Al/Ti Joint;
Al/Ti异种合金的激光熔钎焊工艺及接头组织性能研究
18.
Micro Organizing Character and Performance Analyses of Cast Steel Piece Ag-Sn Jointing Seal
铸钢件Ag-Sn钎焊接头的显微组织特征与性能分析