1.
Construction on the optimization designing system of shearing mechanism of rolling shear
滚切剪剪切机构优化设计系统的构建
2.
Research on the Design Method of Rolling Shear Mechanism Based on Pure Rolling
基于纯滚运动的滚切剪机构设计方法研究
3.
Application of Offset Mechanism of Crankshaft in Rolling-type Heavy Steel Shear
曲轴偏置机构原理在钢板滚切剪机设计中的应用
4.
The Research on Improving Thick Plates Shear Quality for Double Side Rolling Trimmer
改善厚板滚切式双边剪剪切质量的研究
5.
Improvement of Rolling-Cut Double Side Trimming Shear's Shearing Quality in Heavy Plate Mill of Baosteel
宝钢厚板厂滚切式双边剪剪切质量的改善
6.
Mechanical Parameter and Energy Model of Rotary Cutting Head Flying Shears
滚筒式切头飞剪力能参数与能量模型
7.
The thickness of the steel plate handled by this roller mill (shear machine) is 25 millimeters.
这台滚压机（剪切机）加工的钢板厚度可达25毫米。
8.
Design and Research on Kinematics and Dynamics of the Rolling Shear Machine
滚切式定尺剪机构设计及运动动力学研究
9.
Research on parameters of double axle double eccentricity roll cutting typed cut to length shearing machine
双轴双偏心滚切式定尺剪机构参数的研究
10.
This model is engaged with integrated hydraulic system, which illustrates robust performance.
◆ 采用三点支承滚动导轨，消除支承间隙，提高剪切质量。
11.
Simulation of the Tube Roll-Cutting Process and Key Equipment Design
管材滚压剪切过程的数值模拟及关键设备的研究
12.
generating cutting
滚(齿)切(削)法
13.
rotary gang slitting
带材多刀圆盘剪纵剪切
14.
One that cuts, shears, or clips.
修剪工切、剪或削的人
15.
Skipping an irregular paint application, usually occurring when improper contact is made between the applicator roll and the strip. See also starving out.
剪切—剪切还发生在辊与辊接触点。剪切通常还指金属剪切设备。
16.
"Hydraulic shear-dual, dia set, resquaring shear set-down out type. "
液压剪,双刃剪,冲模,正方切剪设定
17.
This paper describes the research of selected material and technology of plasma arc hardfacing to make a new type hobbing cutter shearing slice of trans former silicon steel.
本文叙述了有关采用粉末等离子堆焊制造新型的剪切变压器硅钢片的滚剪刀的选材和工艺的研究。
18.
The Relationship between the Average Shear Angle in Vibration Cutting and the Shear Angle in Conventional Cutting
振动切削平均剪切角和普通切削剪切角的关系