1.
SYNTHESIS OF TETRAPOLYMERIC TISPERSANT AND STUDY ON SLURRY RHEOLOGY AND GREEN BODY STRENGTH OF CERAMIC TILE
超分散剂的合成及其对墙地砖浆料流变性、坯体强度的研究
2.
Metallic powders--Determination of green strength by transverse rupture of rectangular compact
GB/T5160-1985金属粉末用矩形压坯的横向断裂测定压坯强度的方法
3.
Metallic powder-Determination of green strength by compression of cylinder compacts
GB/T11106-1989金属粉末用圆柱形压坯的压缩测定压坯强度的方法
4.
Study on the Graded Joining of Al_2O_3 and ZrO_2 in Green Bodies;
氧化铝和氧化锆坯体梯度连接的研究
5.
Practice of controlling the surface transverse crack of high-strength Niobium bearing steel for continuous casting slab
控制高强度含铌连铸板坯表面横裂的生产实践
6.
Research on factors affecting the intensity of dry body of fly ash fired brick
影响粉煤灰烧结砖干坯强度因素的研究
7.
THE INFLUENCE OF THE REAL DENSITY OF CALCINED COKE ON THE BULK DENSITY OF GREEN ELECTRODES
煅后焦真密度对生坯电极体积密度的影响
8.
Effect of morphology and particle size distribution of tungsten powder on compacting performance and green compact strength
钨粉形貌与粒度分布对成形性和压坯强度的影响
9.
Effects of Different Argonr Atmosphere and Green Density on Combustion Synthesis of Ti_3AlC_2 Powders;
不同气氛和素坯密度对燃烧合成Ti_3AlC_2粉体的影响
10.
The effect of stirring intensity and twist moment of mould electromagnetic stirrer( M-EMS) on continuous casting bloom quality was investigated.
研究了结晶器电磁搅拌强度及扭矩大小对铸坯质量的影响。
11.
Study in Applying Cast Blank of High Strength Superplastic Zn-Al_(22) Eutectic Alloy to Extrude and Forge Complex Parts Directly
应用高强度超塑性锌铝合金铸坯直接压制复杂制件的研究
12.
The Property of Two Kinds of Plastic Clay and Their Application for High Strength Electroceramic Composition
两种可塑性粘土的性能及在高强度电瓷坯料配方中的应用
13.
The Research on Forming Simulation of Automotive High-Strength Steel Blank and the Key Technology of Stamping Parts' Unfolding;
车用高强度钢板成形仿真及坯料展开关键算法研究
14.
Effects of contents of water and binder on the strength of Hard Alloy green compacts
含水量和粘结剂含量对硬质合金粉末压坯强度的影响
15.
Measurement of the Solidified Shell Thickness in the Secondary Cooling Zone of Continuous Casting of Bloom
大方坯连铸二冷区凝固坯壳厚度测试
16.
Influence of Temperature and Compact Structure on the Mass Transport during Water Debinding in Ceramic Injection Molding
陶瓷注射成型水脱脂中脱脂温度和坯体结构对扩散传质的影响
17.
Effect of Compact Density on Combustion Synthesis of W-C-Co System Based on Electric Field
电场作用下压坯密度对W-C-Co体系燃烧合成的影响
18.
Numerical Simulation of Mould/billet Temperature and Concentration Field in the Continuous Casting of Round Billet;
圆坯连铸结晶器/铸坯温度场与浓度场数值模拟