1.
Structure Design of Aspheric Polishing Machine and Optimization on Motion Parametres
非球面抛光机结构设计及运动参数优化
2.
The Motion Analysis of Grinding Medium and the Optimization of Parameters on the Ball Mill;
球磨机磨矿介质运动分析与参数优化
3.
The High-Speed Mobile Water Entry and the Mobile Parameter Optimization Design;
高速运动体入水和运动体参数的优化设计
4.
Research on Optimization and Virtual Prototype for Large Hydraulic Parallel Simulators
运动模拟器结构参数优化与数字样机研究
5.
Dynamic Parameter Simulation and Operating Optimization of Surface Driven Screw Pump System;
地面驱动螺杆泵系统动态参数仿真及运行优化
6.
Kinematics Analysis and Parameter Optimization of Nutation Reducer;
进动式减速机的运动学分析及参数优化
7.
Kinematic Analysis and Parameter Optimization of Eccentric Sprockets Transmission Mechanism
偏心链轮传动机构的运动学分析及参数优化
8.
Kinematical Simulation and Parameter Optimization of Single PCP;
单头螺杆泵运动学仿真及结构参数优化
9.
Dynamics Simulation and Structure-Parameter Optimization of Double Helix Single Screw Pump;
双头单螺杆泵运动仿真及结构参数优化
10.
Movement Analysis and Structural Parameter Optimization for Valve Slices in Air Compressor;
空压机气阀运动分析及其结构参数优化研究
11.
Falling Motion Control of Humanoid Robot Based on Parametric Optimum
基于参数化最优的仿人机器人倒地运动控制
12.
Kinematics Modeling of Rocker-Bogie Lunar Rover and Suspension Parameter Optimization
摇臂式月球车的运动学建模及悬架参数优化
13.
Motion Simulation and the Optimization of Control Parameters of Hydraulic Excavator Based on AMEsim Software
基于AMESim的液压挖掘机运动仿真及控制参数优化
14.
OPERATIONAL PLANNING OPTIMIZATION OF UTILITY SYSTEM UNDER PARAMETERS UNCERTAINTY
参数不确定性条件下蒸汽动力系统的运行优化
15.
Studies on the Movement and Dynamic Characteristic of Cereal Cleaning Windmill and Optimized Parameters;
谷物清选风车运动学和动力学特性研究及参数优化
16.
This paper presents a practical optimization method to compensate kinematics parameter errors of medical robot.
提出了一种实用的医用机器人运动学参数误差的优化补偿方法。
17.
Kinematics Analysis and Optimization of Enclosed Combination Mechanism Based on the ADAMS;
基于ADAMS软件的封闭式组合机构的运动特性分析及参数优化
18.
Study on Desulfurization Characteristics and Operation Parameters Optimization in Complex Spouted Flue Gas Desulfurization Technique;
复合喷动脱硫工艺脱硫特性及运行参数优化研究