说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 句库 -> 导流板
1.
flow straightener
导流板,流体导向叶片
2.
The circulation fluid bed boiler water cooling wall against rubs the air deflector application
循环流化床锅炉水冷壁防磨导流板的应用
3.
Flow Field Mechanism of Wind Induced Vibration Response of Large Span Bridge Influenced by Guide Vanes
导流板对大跨桥梁风振响应影响的流场机理
4.
Optimization Research on Guide Plate Installed in Quadrate 90° Curved Duct
90°方截面弯管内加装导流板的优化研究
5.
The vaporize, condense, overflow and guide plate inner are made in stainless steel.
蒸发锅、冷凝管、溢流坝和内部导流板都用不锈钢制成。
6.
The wind deflector integrated behind the rear headrests minimises wind intrusion.
后排座椅头枕中间的风向导流板大大减少了不必要的旋风和风噪。
7.
Just the vertical plates used only, cooling air distribution in the grille brick can not be improved.
单独用竖直导流板不可能很好地实现冷风在格子砖内的均匀分布
8.
The guide plate be installed as can change direction three times before the steam enters the condense pipe.
导流板被安装成为能使蒸汽进入冷凝管之前改变方向三次。
9.
The steam produced in vaporize pan reached the condense pipe through guide plate.
在蒸发锅中发生的蒸汽经过导流板装置到达冷凝管。
10.
Study of Circulatory Sludge Reduction Reactor of Anaerobic/oxygen Limiting with Arc Guide Plate
弧形导流板厌氧/限氧循环污泥减量反应器试验研究
11.
Test method for current proof of conductors on printed boards
GB/T7613.1-1987印制板导线耐电流试验方法
12.
Flow Surface Construction at the Bottom in No.2 Diversion Tunnel of Double Arch Dam of Xiaowan Hydropower Station
小湾双曲拱坝2号导流底孔底板过流面施工
13.
Baffles: Baffles providing controlled air vectors into and through the fume hood shall be constructed from the same material as the liner.
扰流板:扰流板应该和内衬材料一致,其引导通风柜气体排除柜外。
14.
Study on Hydrodynamics and Drying Characteristics of Multistage Fluidized Bed with Draft Tubes;
带导流管穿流板多层流化床流体力学特性和干燥特性实验研究
15.
Study on the Hydrodynamics Performance of New Type High Flow-guided Sieve Tray;
新型高效导向筛板的流体力学性能研究
16.
FLOW CYOMETRIC STUDYS OF PLATELETS ACTIVAION BY SHEAR STRESS;
应用流式细胞术研究剪切力诱导的血小板活化
17.
A Framework of Traffic Flow Guidance System for VMS;
适于可变情报板的车流诱导系统结构框架
18.
Design of Injection Mould with Wedge-shaped Plate Typing and Hot Runner System for Mineral Water Bottle Parison
楔形导板分型矿泉水瓶坯热流道注塑模设计